-
NAS540 upgrade options -
I have a NAS540 with 2x 6TB drives in a raid 1 configuration. I have 2 more 6TB drives which I have added. I can't change to raid 5 as it is 16.37TB (according to the menu screen). Is there a trick to get this to work somehow? If not, what are my options? If I add the new drives to expand the raid 1 array, what will I get?…
-
Twonky does not find videos
ZYXEL NSA325-V2 Twonky 7.2.10 Twonky see only photos, but no videos. Some time ago NSA was fully cleaned with the Initialization Wizard. It worked well few days but now Twonky see only photos. #NAS_Nov_2018
-
NSA325 Removing google drive deleted all my data
can anyone help? I am in need of some emergency help. I disabled google drive and removed it as it wasn’t backing up my stuff. Upon removing the feature all my data went! It appears it’s deleted. Has anyone had any success recovering data in a similar situation? Any help would be greatly appreciated. Lee #NAS_Nov_2018
-
Coverage Zyxel Armor Z2
The problem with network coverage. The Zyxel router has the same coverage and is even worse than the old Asus router. At the same time having a much more powerful antennas.
I checked all the settings of the router, there are no serious obstacles in the way of the signal.
For nadladnosti attached photo coverage…
-
NAS326 & Twonky Media Server
Hi,I have NAS326 and Twonky Media Server does not work. I went through all the setup parameters, but nor Windows Media player nor Samsung SMART TV can't see any photo and video. I just update the firmware. Can anybody help me? Thanks #NAS_Nov_2018
-
NSA325v2 doesn't work
Hi all, is there any way to reinstall a firmware with USB-Stick (or other way)? My NSA325 v2 is starting, power LED and USB led are on but that is all. I have no connection to NAS, my Router does not see him, i also had try to start without HDDs. There is also no beeping at hard reset. All cables are checked and ok. I got…
-
NAS326 iSCSI and Virtualization Options
I spent all weekend moving vm's around in my proxmox nodes and thought a nas would be the end to all my problems. I considered doing it by hand using raspberry pi and a 4 in one jbod setup, but I saw this and saw it supported raid and networking... I got iscsi to work in windows, but I really want it work in linux,…
-
NSA326 Remove disks from Raid1
Hi, I have a NSA326 2-bay NAS with 2 HDDs in RAID1. How can I change it back to RAID0/JBOD without loosing all my data? Is there a linux command to solve this problem? Thanks. #NAS_Oct_2018
-
Plex server
Hi everyone I’m new to the forum and just want some help I’ve set up my nas520 and put media on it put I was wondering if I can put plex on it and if I can. Can people help and advice me please #NAS_Nov_2018
-
NAS540 4-Bay kein zugriff mehr über ssh oder ähnliches
Hallo Zusammen, leider habe ich den Zugriff auf die NAS540 komplett verloren. Ich konnte noch meine Daten retten allerdings komme ich gar nicht mehr in das Backend (Control Center) rein. Da scheint was kaputt gegangen zu sein. Ich kann zwar noch meine Zugangsdaten eingeben aber werde immer wieder zur Loginmaske…
-
nas326 initial setup never logs in
'logging in" Initially, I was prompted to setup a new username/pw, but it would never take a new username pw, but if i let it take admin/1234, it would take it... Anyways. tried resetting the device using the 1 beep method as well as 2 beep method. Now it never acknowledges the login as successful or failed, but simply…
-
How to uninstall zysync?
Dear comunity! I have huge problem with my NAS540 boxes. I have one Synology box too, and I want backup this Synology to NAS540 but I get "failed rsync login attempt" error message. It seems the Zysync module listens on same 873 port and blocks rsync login from Synology. Do you have any idea what to do with it? Thank you.…
-
Format drives in NSA325-v2
HI. The hard drives in my NSA325-v2 need to be replaced because of bad SMART values (have already initiated RMA with WD) so I need to format them before sending to WD. Is it possible to do directly in NAS? Is it enough to delete the existing volume? Or should I connect the drives to my PC and format there? #NAS_Nov_2018
-
NAS326 : Can my new NAS326 use HDD from WD my Cloud?
Hi I was found that WD my cloud didn't work. Other good news, It's out of warranty. I bought NAS326 in order to replace the broken WD. So, I disassemble the WD and put the HDD on usb dock in order to check it up. It can be work with EXT4 file system. I didn't lost any data inside the hdd. Once, I put the hdd to NAS326.…
-
NFS-protokol
Hallo, how to run NSA325 v2 and nas540 with the NFS protocol? The two servers have no internet connection.Many thanks for a answer! #NAS_Nov_2018
-
How to clone the internal JBOD disk to a larger one?
I want to use a bigger internal disk. Can I clone the content of the current disk to a new one? #NAS_Oct_2018
-
entware on NSA320
I accidentally uninstalled Entware on my NSA320. I'm not able to reinstall it through the Web Admin packages page (That page doesn't Retrieve any new list from internet nor does install change anything in /opt directory) Does anyone know how to fix this? #NAS_Oct_2018
-
NSA310s predefined shares without disk value
Hello, I am not able to assigned predefined shares ( like "video")to a disk volume on ma NSA320s. I have tried factory reset, reinstall, ... nothing helps .... Because of this I can not copy any file to predefined shares. Predefined share path is without volume name. I can only create my own- user defined shares, but they…
-
NAS 520 disk replacement
Dear all, one day my NAS started to give a very nasty beeping sounds and it turned out my raid 1 just got corrupted so I replaced it. When I put in the new hard disk the status changed to uninitialized and now I'm being asked to initialize which I guess means I'm going to loose my data which I don't want. Furthermore now…
-
Nas326 iDrive/pacman
So I'm trying to run the idrive client directly on my nas326 to run cloud backup and i came up with the following options: 1. Somehow adapt the app idrive has made for Synology/qnap/asustor devices-have no clue if even possible 2. Use the perl script idrive provides for linux and run it under the native arch Linux-am stuck…
