-
EMG3425-Q10A
What is the maximum cable length that the LAN ports can drive?
-
Why is my 2.4G bandwidth only 20 mhz
I don’t see any place where I can set the bandwidth and channel. My current 2.4G connection rate is only 144 Mbps
-
VMG4825-B10A Reboots 5-6 Times Every Day!!!
Operating on Firmware V5.11(ABFT.1)C0, our VMG4825 has rebooted on its own about 5-6 times every day. We never know when. This is obviously not good and we've talked to our ISP several times to no avail. I can't seem to figure out if the firmware is up to date or if we can even manage that without throwing the ISP off.…
-
How do you block ping on VMG8825-T50 router?
I've tried using a firewall rule to ignore external ping requests but i get still responses. Security > firewall > access controlrule: IPv4 / ICMP / DROP / WAN to ROUTER (or wan to lan) Thanks for your help
-
Re: VMG8924-B10A not resolving local names
-
Portforward on VMG8825T50 doesn’t work
The Current Firmware Version: V5.50(ABOM.3)C0 the portforward doesn’t work. please advise, Thanks
-
VMG8924-B10A not resolving local names
I have DNS set to Dynamic (as opposed to 'Static' 'From ISP' or 'None') but local names are not being resolved. This is odd as the names are clearly known as they are visible in the network diagram. How do i ensure that local names are resolved? #SP_Sep_2019
-
ZYXEL NBG6615
My router NBG6615 was constantly rebooting. I managed to get a log from the router over TX/RX. Can it be restored? Log Booting... init_ram 00000102 W init ddr ok DRAM Type: DDR2 DRAM frequency: 533MHz DRAM Size: 32MB JEDEC id EF4016, EXT id 0x0000 found w25q32 flash vendor: Winbond w25q32, size=4MB, erasesize=4KB,…
-
How do i log in to ZYXEL Outdoor CPE? 192.168.1.1 takes me to login but admin/1234 is not working
username: admin password: 1234 is not working #Others_June
-
Configuring NAT for webserver Zyxtel VMG8924-B10D (Tiscali provider - FTTH )
Hi all! I have on my net a home web server for testing purposes. I've configured DNS for web access but when I try to config NAT from DNS I see the router login page. Web server address is 192.168.1.163 and this is the NAT configuration: Also I've trying to use the application tab with the default config for web server but…
-
Zyxel EMG3415-B10A Port Forwarding Loopback
I have port forwarding set up successfully and I can access my server using the global IP from WAN, but when I try to do it from LAN on my network I just land at the router configuration interface. Is there a way to configure loopback or some other solution?
-
Does AMG1302-T11C firmware version 3.00(ABCG.13)C0 support WPA2(AES) or WPA3 security protocols?
Hi, Do you know if the latest firmware version 3.00(ABCG.13)C0 on an AMG1302-T11C router allows for the wireless security protocols WPA2/WPA3, WPA2(AES), or WPA3? Many thanks
-
ROUTER (3925-V10C) blinks internet light 2 x per sec. speed v v slow.
what is this fault ?
-
My router is not connecting to the internet
Hello, I have ZyXEL vmg8924-b10a. The cable works, if I plug it into a computer it's fine, but if I plug it in the router I get red internet light. I tried to do the factory reset and update firmware, nothing changed. Please help me.
-
WAH7601 Bug Report: Mixed G/N Connection Issues
It's still new and I have yet to carry out more tests, but I have determined so far: 1. If mixing wireless g and n clients, the wireless g client must connect first, otherwise it will not connect. 2. Wireless g client disconnects/reconnects at random intervals when n client is also connected. Hope this can be fixed in a…
-
LTE7460 No SIM error
Hi All, I'm experiencing this issue with few months old Zyxel LTE7460 that the router loses connectivity and tells me "No SIM error" in the WebUI. Issue is fixed after multiple reboots, but then it might work only for few minutes and crash again. Router is in Bridge mode and behind it I have an Asus router handling the…
-
ZyXel SP-300 network printer (N4100 Hotspot gateway)
Hi, where can I download printer driver for SP-300 network printer? SP-300 is included in N4100 Hotspot gateway kit, but I would use it to print other ticket too. thank you #Biz_May_2019
-
Accidentally switch to bridge mode
In the app, I was looking around and accidentally switched to bridge mode. After it came back up, I switched immediately back to NAT mode. Ever since then our devices won’t join wifi and the primary multi router goes back and forth from white to steady red status. HELP!
-
how to turnon wifi
how do I turn on the WiFi signal broadcast
-
EMG2926-Q10A
I forgot my login password and there is no way to reset. Admin and 1234 do not work. I need my WiFi password because my son is coming to visit and he will need WiFi. How do I get my WiFi password? Please help! #SP_Feb_2020
