-
PLA6456 connectivity and node type issues
I intended to replace my Netgear (Homeplug AV2) powerline adapters with these Zyxel G.hn adapters because they're supposed to provide better performance and error handling with noise. However, these are noticeably slower. I updated FW to ABSU.6 from ABSU.5 with no improvement/change. * I haven't found a good (useful)…
-
Problem with Access Point WAP3205 v3
Buongiorno, ho un problema con un'access point WAP3205 v3. Ho notato che non salva la data e l'orario. Purtroppo per questo problema non naviga in internet. Questo è il terzo AP che ha lo stesso problema. Sono io che sbaglio qualcosa? la prima cosa che imposto è la data e orario, poi imposto il AP come Client Mode.…
-
router related
I can not log in to my router, have factory reset it with no luck. does not accept new user name nor the one at the back of the router. Help please!
-
ZyXEL PLA Series Configuration - software does not open correctly.
It opens approximately in the size of 6 desktop-icons. There is no way to maximize. Is there a fix for this?
-
DHCP Settings and DHCP Reservation list
Do not understand DHCP Settings and DHCP Reservation. Is DHCP Reservation off limits to all DHCP IPs, unless assigned by you to the DHCP Reservation list? Example: DHCP start address 192.168.0.2 to end address 192.168.0.254. DHCP Reservation start address 192.168.0.2 to end address 192.168.0.20, nothing will be in this…
-
Unable to access router's web configurator
I have a AMG1202-T10A router. The router seems to be rejecting connection attempts when I try to access the web configurator by using the IP 192.168.1.1 on the web browser. I have tried disabling the pop-up blocker on the browser as instructed by the user guide. I also tried connecting to the router over the wi-fi and…
-
P660HTW2 EE as WiFi distributor
Hello!I have an old P660HTW2 EE ADSL2-modem.Recently I was given a GPON WiFi access point, and ADSL was no longer needed. But the wifi signal is very weak in my room. Is it possible to configure my ADSL modem so that it catches WiFi and distributes it over the wire? Thanks in advance. Vitaly
-
Zyxel Cant be registered?
Hi Everyone I have recently got a Zyxel VMG3925 home router and I have tried to register the device but I don't have the details of the supplier email or VAT I am based in UK and got the connection through John Lewis broadband, can anyone give any suggestion please as I have only MAC and Serial Number of the device. Thanks
-
WiFi issues with AX7501-B0
Hi All Just thought I would pop a thread on here about issues I am facing with the Zyxel AX7501-B0 device. Two fold: 1) WAN speeds are not as fast as my other routers (this is infrequent - so not a huge issue...yet) 2) WiFi speeds - REALLY bad upload speeds, on all bands and channels, tested on multiple devices to be sure.…
-
IP Port
How to forward IP port?
-
VMG8924-B10A, No Remote MGMT
HI. I cannot connect to my VMG8924-B10A router anymore. I think I was hacked as my DNS on my router kept on being changed. So I wanted to remove any remote access to my router. I logged in and unticked everything on the Remote MGMT tab. I did not think this will also lock me out of the router. Is there any way I can get…
-
Zyxel c1100z 80/10 Service Question
Service is 80/10, cleared stats recently (as you can tell) because I just finished installing the home-run to the modem, and I have the rest of the house disconnected for now. Stats are below. I get a retrain sometimes 1-2 times in 24 hours or less. Sometimes there are 30-60 Near-End CRC errors. FEC might get into the…
-
Help | XMG3927 - Port Forwarding | DMZ not Working
Hi, Today i switched to the XMG3927 G.Fast Router to leave the ISP Provided Modem behind (Switzerland - Wingo / Swisscom. My Setup is simple: WAN - XMG3927 - LAN (With Nextcloud-Server) Situation: WAN Works perfectly and normal routing is fine. As you can see, i would like to reach my Nextcloud from outside via…
-
Google Pixel 4a drops wifi connection
Hello, i have a wap3205 v3 on the latest firmware and an android google pixel 4a. Every 15 seconds it loses the wifi signal and reconects. I don't have this problem with any other device, but i tries with a diferent device of the same model and it does the same thing. Do yoy have any idea why this hapens?
-
PLA6496 Pairing Issues
Hello All, I have 4 PLA6496 units that are having pairing issues all of a sudden, and I am unable to access the web gui on 2 of them. Previously I could see the addresses in my firewall but now they are not even requesting DHCP (which is the first step, I think, to getting to the gui). I have been through the pairing…
-
Change Admin
Was wondering if it is possible to change admin to something of my choice. I know that a password can be changed #Others_Apr_2020
-
C3000z
c3000z usb port used for?
-
Google Mini nest: connect with old Zyxel router, not new one (Help please!)
I am using a Zyxel Model VMG3925-B10C, Firmware V5.13(AAVF.13)J1. These are provided by John Lewis broadband (basically it's Plusnet, sold via John Lewis) I was initially connecting using a Zyxel Model VMG3925-B10A which worked fine with all our devices, including six Google mini nests. Unfortunately the old router started…
-
SBG3300-N000 "Firmware upgrade failed. File contains an invalid model id."
Hello I'm trying to upgrade the firmware on my device. It currently has V1.01(AAZZ.1)C0 installed. I'm finding it hard to locate the best place to get the firmware files but I've managed to download BG3300-N000_1.01(AADY.9)C0.zip which I unzip and then try to upload the .bin file for a firmware upgrade. It gives me an…
-
Block Gaming
I have a Wireless Router (C3510XZ) provided by Centurylink for my residential internet service. I would like to block access to all gaming at the router. Is there an easy way to do this?
