-
GS1910 - when are packets categorized as "Filter Received"?
I have some older GS1910 switches on my network running V2.00(AAAY.0)C020150609 firmware. In looking at the Port Statistics Overview page I noticed a large count in Filtered Received on a few ports (see below - highlighted in yellow). Port 23 (which has the highest number) is part of a static lag with port 24. Port 23 and…
-
Extended range feature not working properly
Hi Just got the new model Zyxel GS1350-12HP switch and try to use the "extended range" . After enabling the feature in web interface, I then connected my ethernet cable (around 250 meters) from switch to my ip cam. Somehow the ip cam can only have the PoE power but no data transmission, so it won't work at all. Anything…
-
GS-1920 Firmware upgrade path
Hello, We have a GS1920 that has not been updated in a long time. It is running firmware V4.10(AAOC.0) Are we able install the latest firmware or is there an upgrade path we should follow? Thanks,
-
Switch Private VLANs in multi-switch environment
Hi, I have a question about private VLANs in bigger switch environments. We want to employ private VLANs to secure our PC environment. Rather than having lots of VLANs and subnets (making office moves difficult without changing desktop users IP addresses) we felt the use of Private VLANs was a good way to isolate all…
-
Un-tagged packets - how are VLAN tags applied?
If on a switch you have defined a PVID for a port, a Subnet based VLAN, and a Protocol based VLAN which “rule” is used to apply the VLAN tag to un-tagged packets the port receives. Does one “rule” take precedence over the others? Are the rules evaluated in some order?
-
GS1920-24HP - which version do I have?
Hello I'm trying to work out if I have the v1 or v2, in order to download the correct firmware. Is there any way to tell by logging into the switch as opposed to physically checking it? Thank you Al #Biz_Jan_2020
-
VES1724-56 bridge mode
Hi I am trying to put this switch into bridge mode to allow the DHCP server to handle addressing as the is a video on demand system on the network. I have VMG1312 modems which were set to DHCP but that was messing with the VOD system. I have now set the modem to bridge mode and the switch to "Global" in IP management/DHCP…
-
Forwarding one VLAN to another
I need to connect my internal network to factory network. Factory network should connect to all computers and other devices in my internal network. My network shouldn't see devices of factory network. For this I use commutator GS1920-8HPV2 (Firmware: 4.50 ABZ.0 05.07.2018) I created 2 VLANs: VLAN 10 - for factory network…
-
Is it possible to automatically log into a Zyxel GS1900-8HP Switch by using html/php/js?
Hello, I'm looking for a way to display the "virtual device"-overview of my Zyxel Switch (GS1900-8HP) on an other webpage (a webserver running on my raspberry pi). Right now I'm displaying the "Virtual Device"-overview by using the "iframe" attribute in html. But for that, I always have to log into the management-website…
-
Link aggregation between two GS1900-24E switches
Is it possible to use link aggregation (e.g. LACP) to connect two GS1900-24E switches witch each other? #Biz_Switch_Mar_2019
-
GS1900-24E
Hallo, ich habe einen GS1900-24E mit 24 Ports 4 Combo Ports. Siehe Bild. Das Modell wird auf der Zyxel Homepage nicht aufgeführt und im Web-GUI werden nur 24 Ports angezeigt. Eine FW Aktualisierung hat auch nichts gebracht. Weiß jemand, wie man die zusätzlichen Ports angezeigt bekommt?
-
VLAN reconfiguration
I inherited a poorly configured network and I need to make some changes to secure it. I have 4 GS1920s and they are all running on the default VLAN 1. I would like to move all my computers to a different VLAN (1020). The only problem is that I cannot change the IP addresses in my network, since I have servers with IPs that…
-
GS1900 8HP's keep resetting to default IP address
Hello- I've got 3 Zyxel switches in my home network and they all keep randomly resetting to the factory default IP address of 192.168.1.1. Then I get network conflicts and degradation of service until I go into each one and change it back to obtain an address via DHCP from my router. What can be done to stop this from…
-
GS1200-5HP v2 support PoE+ ?
hi, I connect a cisco AP 1832 on a GS1200-5HP v2, but the switch can't power it. The switch can do that ? how i configure it ? Best regards Jerome #Home_Switch_Dec_2019
-
GS1920-24HP Switch - Reset / Bricked ?
Hi, I have recently updated my GS1920-24HP - granted it is old but have just got around too it now. It was currently on version 1 but i updated to GS1910-24HP_V2.00(AAAY.0)C0. once updated it was powered down, now the device is noting coming back up fully. Looking at the control panel the PWR and SYS light are solid green.…
-
XGS3700 - issues setting up LAG to USG1100
I have three XGS3700-24 switches in a stack. All on firmware v4.30(AAGC.2). I am trying to add a two port LAG using LACP (802.3ad) between the XGS3700 and a USG1100. When I configure the LAG on the XGS3700 by checking Group ID T3 and setting two ports (on the same physical switch in the stack) to T3 and then pressing the…
-
Setting up VLAN on GS1900-48HP
Hi We employed a company to set up CCTV and POE switches and VLANS but they disappeared before completing the job. I have 12 switches around school and I have never used ZyXEL products before. I have managed our network for 10 years but have no experience of setting up VLANS. I've tried but just manage to disable our…
-
XGS3700 - problem with IP Source Guard
I have 3 XGS3700 switches in a stack running v4.30 firmware. I had the need to setup IP Source Guard to perform DHCP Snooping to eliminate the possibility of unauthorized DHCP servers on the network. I have 8 vlans configured on the XGS3700. A USG1100 to provides DHCP services to each vlan (thru separately defined DHCP…
-
what is difference between SFP-SX and SFP-SX-D
Hello what is difference between SFP-SX and SFP-SX-D. I can not find information about SFP-SX.
-
GS1900 series - understanding QoS, Remark options and Trust Mode
Is there a clear explanation document available on how QoS works on the GS1900 series on both normal untagged ports, tagged ports and trunks? I am having a network behind an USG60 where the first GS1900-24E has an uplink to one GS1900-8HP for 3 NWA1123-ACv2 and 2 IP cameras, another uplink to one GS1900-8 connected to pc's…
