-
USG FLEX 200H: LAN port is experiencing unstable up/down status.
I have a USG FLEX 200H and a WAC500, both managed via Nebula Control Center (NCC) Organization Name: Tony House Site Name: Tony House Firmware Versions: Gateway (USG FLEX 200H): 1.32(ABWV.0) Access Point (WAC500): V6.70(ABVS.6) Network Topology: Internet — [public IP] — USG FLEX 200H — [Port 5] — WAC500 Issue: Port 5 on…
-
USG 200H wan upload problem
Hi all, I just replaced my old Zyxel USG 20W with a new USG 200H (with gold licence) and I'm having problems. Here is a first problem, the upload speed is stuck at 5 Mbit while i have an internet line with 30 Mbit. BWM is not actif and i don't apply "Application Patrol", "Content Filter" and "SSL Inspection" Here are the…
-
Duplicate static IP or subnet overlap detected across interfaces.
USG FLEX 200H V1.32(ABWV.0) Duplicate static IP or subnet overlap detected across interfaces. Please use unique IPs and subnets. This is incorrect and the interface IS using a unique IP the problem happens when using Secondary IP's
-
USG Flex H-Series - Official firmware downloads?
Hi Zyxel Team! There are no H-models in the myZyxel.com portal to download official firmwares for the devices. Even when I follow the download-link in the support page of the device (https://portal.myzyxel.com/my/firmwares?fw_version=1.31(ABZI.0)C0&model=USG%20FLEX%20700H) there is nothing in the download-section. I tried…
-
Reverse DNS Lookup for Hostname when USG Flex H is not DHCP Server
Hi there, I use my main Windows Server for DHCP, as I have to for Active Directory to work. That server forwards requests to my Zexel so I can screen. I can setup xxx.xxx.xxx.in-addr.arpa as a DNS forwarder zone on the Zyxel for my internal network. It would be fabulous if you could use this to reverse DNS into the…
-
V1.32 500H: the logs are broken
The logs are broken even with 1.32 firmware
-
Users may not be able to upgrade to V1.32 if on 131ABWV0ITS-0311-GUI
If on 131ABWV0ITS-0311-GUI So today was not able to update to to V1.32 by UI but could see V1.32 in Nebula under firmware type latest but when you click to upgrade nothing happens so only way was to install another firmware like 131ABWV0-0203-sysrepo then by UI was able to download and upgrade to V1.32
-
V1.31 not stable to the UI
FLEX200H V1.31 Short uptime and I get this
-
need interface rate limiting
Not yet tested BWM but to really test this interface rate limiting is needed. Also be able to limit by Mb and Kb Thanks
-
ipsec vpn between usgflex50H and usgflex200H
-
VPN SSL USG 100 FLEX MAC OS SECUEXTENDER 3.2.4
Ciao a tutti ho una VPN SSL configurata sul mio USG 100 FLEX firmware (con windows funziona ancora ZyWall Secuextender), ho bisogno di configurare Secuxtender Ipsec SSL 3.2.4 su un macbook con Sequoia, qualcuno mi può aiutare a configurare lato client? Grazie
-
Flex 500 H CLI command list
Since BGP, RIP, OSPF, and all routing discovery protocols are not included in the GUI as they should be, I tried to locate the settings in the CLI console. Great! the command structure is all different too and there is no CLI console command list to help find functions and features. So not only did you release this model…
-
Hello Team, Can i get the zyxel usg flex 200 hp cli commands documents.
-
IPSec VPN on H Series Loopback/Reflection/Harpinning....
How to establish L2TP tunnel from LAN side — Zyxel Community https://community.zyxel.com/en/discussion/1583/how-to-establish-l2tp-tunnel-from-lan-side Does the above still work on the USG FLEX H Series for IPSec VPNs? Or do we need a different command? Our customer's prior VPN solutions supported this, and it was real…
-
Flex 100HP 1.31 showing -1 "Login Users"
Hello everyone, sometimes when logging into the admin page of the 100 HP I see "-1" as value of logged users: and if I enter that section I see nothing: that's really strange 😎
-
USG Flex100H factory reset doesn't reset password
I have a 100H that I cannot log into via console cable. I have tried debug mode reset and the reset button methods. When I try and login with admin / 1234 via the console cable it returns "login: pam_setcred failed: Permission denied (6)" I'm at a loss of what I can do next to revive this device.
-
USGFLEX 100H - SecuExtender VPN client configuration with static ip client
If I set a fixed client IP in child SA and disable retrieving parameters from the server, the VPN does not establish, and I get the message: "The gateway is configured to send the configuration." How can I disable this restriction on the firewall? I need to set a static client IP. Thank you
-
How old is my USG20?
I want to find out how old a USG20-VPN router is. I have the serial number, but I can't find any place to apply that information to find the production date. Any clue, anyone?
-
Problems with Version V1.30(ABXF.1) USG FLEX 100H
Hello, after upgrading 2 USG FLEX 100H devices from version 1.20 to V1.30(ABXF.1) there are multiple problems. 1.- Performance-bandwidth problems (The client has 1G internet access on the WAN and we only have 100M from LAN to WAN 2.- Sessions and traffic are not shown in the logs or Dashboard 3.- Traffic cannot be seen in…
-
flex 500 H - disconnect user from SSL VPN - error code 10048
Hello, I have a problem disconnecting a user from SSL VPN. When I try to disconnect via the router's web interface, it displays this message: "cmd users force-logout unique null user null service null" and the user is not disconnected. Thank you Zdenek