-
NWA1123AC: HD vs PRO?
I'm trying to decide between the NWA1123AC HD vs the NWA1123AC PRO. They seem to be very similar products. The PRO is $28USD cheaper. Some differences: HD: AC1600, MTBF 1,306.790, heavier (heat shield?), more 5GHz frequencies PRO: AC1750, MTBF: 1,005,235, higher gain Does anyone have any experience with both/either of…
-
Comparison between NWA5123 AC-HD and WAC6303D-S ?
Hello, Any big difference between these two AP models ? Their tech specifications are quite similar: and I know that WAC6303D-S sports the bluetooth connectivity (BLE); but in terms of the performance which of the devices is better ? thanks
-
NWA1123-ACv2
Hello, how can I reset the AP "NWA1123-ACv2" to factory settings?I get in the browser just with an error message called. #Biz_Aug_2019
-
Factory Reset AP via ssh
Is it possible to factory reset an NWA-5123AC via SSH command?
-
NWA1123-AC-HD, Firmware upgrade - worth doing it ?
Hi, I have x2 NWA1123-AC-HD access points running the following firmware : Boot Module: v1.10Current Version: V5.10(ABIN.2)Released Date: 2017-10-02 01:56:28 On the downloads page I can see 2018/2019 versions but not the version I have. In the event that the latest had issues it would be good to downgrade back to the 2017…
-
Zyxel NWA1123-AC-HD in repeater mode
Hi all, to solve several wifi issues at home I have decided to buy a pair of NWA1123-AC-HD access points. The assumption was, as these devices were sold as a set, that I can use one as the main AP (connected to my switch) and the other as a "repeater" to extend the existing network. Unfortunately there seem to be no way to…
-
NWA5121-NI LED is always continued amber on,can't reset
When I use zyxel USG110 to manage NWA5121-NI to repeater operator,the LED change to amber continued ON, can't work correctly,how can I reset my NWA5121-NI? #Biz_Aug_2019
-
How can I make the NWA1123-AC web configurator display properly with Firefox or Chrome?
I just upgraded the firmware on my NWA1123-AC to V2.12 from V2.11 hoping it would solve the web interface problem I have, but it didn't. Whenever I want to make changes I have to drag out an old Windows 7 laptop with Internet Explorer so that the screens in the configurator will be displayed properly. I use linux and…
-
NBG-418N v2 subnet error
Dear all, we are using a NBG-418N v2 with firmware V1.00(AARP.9)C0; we need to change subnet from /24 to /23 but still present the error of invalid subnet: We try with different browser but still the same. Any suggestion ? Rgs Max
-
WAC6502D-E -> experience with?
Hi I cant wait for a Trial Model I have to ship one AP fast to a remote location. Later I will build a Zyxel Hotspot System. Can the AP run as Standalone? I found no info inside the Partner Portal beside of this existence... And this Thai Video with somce Screenshots: https://www.youtube.com/watch?v=PfTR9zMczbM Thanks
-
Roaming
Zyxel statement about roaming: To set a roaming environment, APs need to use the same SSID, subnet(DHCP server),security settings and the coverage of these APs is overlapped. My question is: Is there a simple way or test to see that the APs coverage is overlapped? And how fare should the overlap be? It is a simple…
-
Disconnects from LAN NWA1123-ACv2
We have several offices. We use NWA1123-ACv2 and NWA1100-NH access points. With NWA1100-NH, all is well, good. But NWA1123-ACv2 access points periodically disconnect from the local network under load, for example, if they allow a lot of traffic to pass through, or volumetric content is being downloaded (YouTube, etc.). We…
-
Problem with iPhone and NWA1123-ACv2
Hi guys, Have a customer who use NWA1123-ACv2 - 3 pcs. Home network, mostly used for 4-5 pcs Apple and few Adroid devices. Generally everything work fine, speed is ok, but!The problem occurs without any reason, only on iPhones. He came back from work, first connection to the system, everything is fine. After a while, the…
-
WAC6552D-S with ZyWall
Hello I have a question concerning the WAC6552D-S Access-Points. We want to use 3 pcs with a ZyWall 110 as managed APs. The Zywall detects the Access Points and shows them in the Controller menu, but the Access Points do not switch into "Managed AP mode", the Status page keeps saying that the access point is still in…
-
WAC6303D-S the best for a smal Hotspot System?
Hi We have 4 Floors and need a Hotspot System. Since I have to buy everything new it must work. I dont know which Zyxel Router I will buy yet. I looking for the WAC6303D-S the look the newest one. For switch this one: GS2210 with an centralised Management. I will not hany any cloud sshhtt. The Amy dont need to know what my…
-
LED suppression disabled after reboot
Hi I have two WAC6503D-S connected and managed by a ZyWall VPN 100. After the system is up (the ZyWall and the both AP's), I set the "LED suppression on" on Monitor\Wireless\AP Information\ @ each AP. It works well, the LED's are off. When I reboot the AP's, the LED's are flashing during startup, what is fine. But after…
-
nxc-2500 change psk key with cli
Hello! over telnet after login ... configure terminal wlan-security-profile guest_sec wpa-psk blablablablawrite exit become the wpa-psk changed and on the gui correct showed but wlan login dont work.I think i need some as "apply" on the cli ?on the gui, after wlan-psk rewrite and "OK" then works ...Thanks in advance...
-
How to switch WAC AP to Nebula from on-premises controller
This article is shown you how to switch AP to Nebula from on-premises controller. Please follow these steps to migrate your AP to the cloud and enjoy managing your network anywhere and anytime. Apply to WAC6103D-I, WAC6502D-E, WAC6502D-S, WAC6503D-S, WAC6552D-S, WAC6553D-E Step1: Go to Nebula Control Center to register…
-
WAC5302 constantly rebooting
Hello We have the following setup in a customer installation Zywall USG-40 as AP controller for 6 WAC5302 Accesspoints. A additional 4 AP license is installed on the USG. Firmware for the USG is V4.33(AALA.0) Firmware on the accesspoints is V5.00(ABFH.5) The accesspoints are rebooting every 2..3 minutes. In the logs, I get…
-
Reboot remotely a LTE3301-Q222
Hi,I'd like to be able to reboot remotely a LTE3301-Q222 via Wi-Fi but I cannot figure out how to do that. I tried to connect with telnet but I don't know the password. I tried the default password and the admin password but none of them work. How could I do that?