BGP Failing with "error code 6 subcode 5 (Connection rejected)"
Morning all.
Ive just installing a Zywall 310 (Firmware Version:V4.71(AAAB.0) / 2022-02-22 20:44:02)
I have a interface connected to a network where there are two BGP neighbors. I have ping connectivity to them both.
Diags >
Router# show bgp summary
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
===============================================================================
172.xxx 65001 10 5 0 0 0 never Idle
172.xxx 65001 12 6 0 0 0 never Idle
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
===============================================================================
172.xxx 65001 10 5 0 0 0 never Idle
172.xxx 65001 12 6 0 0 0 never Idle
Ive tried changing few things on the 310 but still the same.
Doing a packet capture i see im getting this from both neighbors >>
Border Gateway Protocol - OPEN Message
Type: NOTIFICATION Message (3)
Major error Code: Cease (6)
Minor error Code (Cease): Connection Rejected (5)
Searching the web i only find this > https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClhtCAC
Any pointers / Suggestions please?
Thanks in advance
0
All Replies
-
thanks- but issue was LAN side of the router. Networks folks fixed overnight
0
Categories
- All Categories
- 415 Beta Program
- 2.4K Nebula
- 147 Nebula Ideas
- 96 Nebula Status and Incidents
- 5.7K Security
- 262 USG FLEX H Series
- 271 Security Ideas
- 1.4K Switch
- 74 Switch Ideas
- 1.1K Wireless
- 40 Wireless Ideas
- 6.4K Consumer Product
- 249 Service & License
- 387 News and Release
- 84 Security Advisories
- 29 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.5K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 73 Security Highlight