Will Device HA work with Vlan WAN & LAN
Options
Ive a HA environment with 2 x Zywall 310's we planned to use Device HA on them.
It turns out the environment we are in is not using physical ports for LAN and WAN connectivity.
Ports 1&2 form a LAG upon which are two VLANS which are then the LAN & WAN of the network.
So
P1 & P2 = LAG1 with No IP address
VLAN123 on LAG1 WAN IP 1.2.3.4
VLAN234 on LAG1 LAN IP 4.3.2.1
P8 = Connectivity for heartbeat
Ive read plenty but in the device HA only talks about physical ports.
Can device HA work with VLAN's in my scenario?
Thanks in advance
0
All Replies
-
Hi @Emerald
This scenario is work. You can create configuration by:
(1) Create LAG interface and binding ge1 & ge2 interface.
(2) VLAN interface and base port is LAG interface.
(3) Configure Device-HA Pro Setting.
(4) Make sure Device HA mode is "Device HA Pro" and enable HA function.
0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 79 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 909 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 898 Nebula FAQ
- 415 Security FAQ
- 234 Switch FAQ
- 205 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight