USG 200 WAN with 2 Networks/VLAN

Hi,

my provider send me some information how to connect by FTTH.

I am using an older USG 200 Security Gateway. I need to connect by pppoe without any vlan id to use internet. I am using wan1. This works great!

To use voip i need to setup a second connection on the same wan interface (wan1) but with  vlan id 2222.

How can i setup a second network on the same wan1 interface?

Thanks

All Replies

  • Zyxel_Kevin
    Zyxel_Kevin Posts: 248
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 5 Answers First Comment
     Master Member
    Hi @Maik20
    Greeting forum, Please kindly add the VLAN interface with VLAN ID 2222 and base wan1 port. 

    Then you may test the VOIP connection. Thank you
    Kevin
  • Maik20
    Maik20 Posts: 3
    First Comment
    Thanks alot. My phone is currently in lan1did i need an entry in the firewall settings to route vlan2222 to lan1? Later i like to move the phone to vlan40
  • Zyxel_Kevin
    Zyxel_Kevin Posts: 248
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 5 Answers First Comment
     Master Member
    Hi @Maik20
    In general, just check you have security policy to allow these traffic. 
    But whether need other settings or not depends on your network architecutre. 
    Kevin
  • Maik20
    Maik20 Posts: 3
    First Comment
    Thanks for your help!

    I have added a vlan2222 on wan2 using dynamic ip. I got an ip from my internet provider on vlan222 10.8.x.x. 

    But now my internet connection wont work any more. If i disable vlan2222 my internet connection works.

    I am using a pppoe connection on wan2 and setup a lan2 (port 3) on the usg2000 to add a voip-fone there. 

    My provider uses two networks connected over one wan interface:

    no vlanid: internet
    vlan2222: voip


    I think my problem is the routing if i enable the vlan2222 

    I never setup some special routes. I am using the firewall to restrict access to some vlans i am using for computer, guest, iot. I only have some routes for a vpn connection to our company (COMPANY_LAN). This is my routing table:



  • Zyxel_Kevin
    Zyxel_Kevin Posts: 248
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 5 Answers First Comment
     Master Member
    edited November 28
    Hi @Maik20
    Did you lost your IP address on wan2_ppp when enable vlan2222 ?
    Please kindly share your configuration file by private messages . 
    Thank you

Security Highlight