License and config to APs when replace zywall

Now I am using the Zywall USG110 but the App Patrol will end support at the end of 2022. I want to replace the router with Zywall ATP200. I am wondering if I can still use the old license manage AP. If it's, what should I do? Add the new devices to my ZyXEL account and transfer the license to ATP200, is that right?
And if I set up the wireless controller on ATP200 the same as the USG100 (IP router, VLAN, SSID, security,..), do the APs can connect to the new controller, or do I have to reset all APs and reconnect again?

All Replies

  • Zyxel_HsinBo
    Zyxel_HsinBo Posts: 122
    5 Answers First Comment Friend Collector
     Ally Member

    USG/Zywall & ATP products are different series that do not support license migration.
    But ATP200 is bundled with one-year of Gold Security Pack license by default, so you could still enjoy the license service without worries.
    For more information please refer to the link below:


    For problem “And if I set up the wireless controller on ATP200 the same as the USG100 (IP router, VLAN, SSID, security,..), do the APs can connect to the new controller, or do I have to reset all APs and reconnect again?”

    If you have not specifically set up APC discovery IP address for exist AP before, just modify the Registration Type to “Always Accept” on new controller from the path below, then you can connect AP to the new controller let the AP sync and apply settings on new APC without resetting the APs.

    Path: GUI >> Configuration >> Wireless >> Controller >> Registration Type

    Thank you.