XS1930-10 printer between VLANs

nox79

Hi, i need a little help to configure my xs1930-10.

Need to share a printer with all my VLANs

I have this VLANs right now:

Vlan 60 - (172.16.60.x) IoT

Vlan 61 - (172.16.61.x) Guest

Vlan 1  - (192.168.1.x) Trust

The printer its installed in Vlan 60 and its up and running all working fine with ip 172.16.60.52.

I have KEA DHCP server running in Ubuntu server with ip 192.168.1.6 and server IPS to all the VLANs.

How can setup the switch and DHCP to allow printer in all my Vlans?

Thanks

Robert

mMontana

IMVHO, unless printer support vLANS on its printer server... you can't.
However maybe a 1:1 NAT might do the trick.
Or you can create some security policy (firewall rules) that allow vLAN 1 and vLAN 61 to access to 172.16.60.52, maybe on limited services/ports.

If you need Airprint, things are gonna be a lot trickier.

Zyxel_Melen

Hi @nox79,

Do you have a router in your network?

If yes and all of your end devices have default gateway settings, they should be able to communicate with each other without any configuration on your switch.

nox79

Hi,
I have in my Network installed the ISP router Zyxel AX7501-B0 but have mostly all the options blocked by ISP.

nox79

Any help???
Regards

mMontana

Maybe you should talk with the ISP?

nox79

mMontana said:

Maybe you should talk with the ISP?

Thanks, but i contacted many times to my ISP provider and not unlock the Router.

mMontana

So you need to put another one between your infrastructure and the ISP router.

Caroll

I agree with @mMontana and @Zyxel_Melen that a router with a configured routing policy that allows for communication between VLAN60 and other VLANs would be ideal for enabling your printer to communicate effectively.