unable to create vlan trunk to switch

ashwinvijay

I have multiple vlans configured in zyxel firewall.

I want to create trunk from firewall to my switch so that all tagged vlans are send to switch. Unable to find a solution

Zyxel_James

Hello @ashwinvijay
For example:
Firewall
LAN1 192.168.1.1/24
VLAN10, ge3/10,192.168.10.1/24
VLAN20, ge3/20, 192.168.20.2/24

Switch
port 1 Tx VLAN10, VLAN20 PVID1 -> connect to Firewall ge3
port 2 Ux VLAN10 -> connect to PC

Result: PC can access VLAN10

Did you encounter anything when deploying VLAN topology?

PeterUK

If you have VLANs of firewall then they are tagged to go to a switch that then VLAN's then out the ports as untagged where needed.

Zyxel_James

May I know your scenario or topology? and what's your Firewall/Switch VLAN setting?

Zyxel_James

Hello @ashwinvijay
For example:
Firewall
LAN1 192.168.1.1/24
VLAN10, ge3/10,192.168.10.1/24
VLAN20, ge3/20, 192.168.20.2/24

Switch
port 1 Tx VLAN10, VLAN20 PVID1 -> connect to Firewall ge3
port 2 Ux VLAN10 -> connect to PC

Result: PC can access VLAN10

Did you encounter anything when deploying VLAN topology?