[Release Note] Small Business Access Point - V6.29 P3 firmware has been released

Zyxel_Judy · November 2023

Access Points Firmware Release Note V6.29 Patch 3

Date: November 20, 2023

Overview

This document provides firmware release information on Zyxel Access Points platforms, introduce new Access Points, new features and enhancements, bug fix, known issues and workarounds information for Release V6.29 Patch 3 C0.

Supported Platforms

NWA50AX V6.29(ABYW.3)C0

NWA55AXE V6.29(ABZL.3)C0

NWA90AX V6.29(ACCV.3)C0

New Features and Enhancements

1.Smart mesh support fixed band (NWA50AX, NWA55AXE and NWA90AX).

2. Standalone mode AP supports one-click automatic firmware upgrades.

3. Schedule reboot feature to solve the client IoP or connectivity issue.

4. CEF syslog enhancement.

Bug fix

Mode Bug fix	Cloud	Standalone
1. [eITS: 221201027, 230100360, 230201226] [Symptom] Nebula Client list can't show normally due to abnormal station signal collected from AP.	V
2. [eITS: 221200976, 221201233] [Symptom] Repeater AP display offline status on Nebula after changing configuration due to AP state error.	V
3. [eITS: 230200225] [Symptom] STA sometimes negotiation at 802.11a mode low speed.	V	V
4. [eITS: 230200215] [Symptom] Device can't connect to the AP due to hostapd issue.	V	V
5. [eITS: 230200778, 230401471] [Symptom] Device reboot by a kernel oops.	V	V
6. [eITS: 230200698] [Symptom] 802.11kvr client capability cannot visible on Nebula Clients page.	V
7. [eITS: 230300082] [Symptom] AP will reboot unexpcted while admin login local GUI on cloud mode.	V
8. [eITS: 230300158 ] [Symptom] Repeater AP will change to offline while performing renew DHCP.	V
9. [eITS: 230200619, 230500745, 230900281, 230900398] [Symptom] TWT default enabled may cause some specfic devices unexpected disconnection.	V	V
10. [eITS: 230201113, 230201390, 230400371, 230400770, 230800410, 230300635] [Symptom] Repeater frequently disconnected from root AP.	V
11. [eITS: 230301784] [Symptom] The portal page doesn't pop-up when SSID configured as Open + with Sign-on Nebula cloud authentication.	V
12. [eITS: 230301107, 230200997, 230500670, 230501673, 230600708, 230501510, 230601224, 230700617, 230801142] [Symptom] Client deauthenticated by key handshake fail.	V	V
13. [eITS: 230301428] [Symptom] Nebula managed message shows on standalone login web gui .		V
14. [eITS: 230401060, 230501350, 230501615, 230600356, 230600632, 230301106] [Symptom] AP reboot by hardware watchdog.	V	V
15. [eITS: 230401304] [Symptom] Nebula Client page shows abnormal signal value.	V
16. [eITS: 230401450] [Symptom] The AP offline after updated firmware due to MTU size.	V
17. [eITS: 231100349, 231100094] [Symptom] The AP offline after updated firmware due to certificate failed.	V

Known Issue

Mode Known Issue	Cloud	Standalone
1. [eITS: 221001752] [Symptom] The log cannot display expected wording while STA disconnected by SSID schedule.	V
2. [eITS: 231000132] [Symptom] The information of password configuration path on Nebula is not correct showing in AP local login page .	V
3. [eITS: 230901349] [Symptom] AP some configurations may disappear due to power off the device while device is applying or writing the configuration and this is rare to happen.	V	V
4. [SPRID: 230905066] [Symptom] Wireless client show rx rate 6M even it uses higher rate.	V	V
5. [SPRID: 230922270] [Symptom] Wireless bridge repeater AP uplink port connect to other device may have LLDP issue.	V	V
6. [SPRID: 230922271] [Symptom] Repeater AP should blink light blue LED while searching the available uplink AP.	V	V
7. [SPRID: 231019190] [Symptom] Wizard can't pop out automatically when upgrade to this new version with default setting. Reset to default can solve this issue.		V
8. [Symptom] TWT is temporarily disabled due to a compatibility issue with specific Wi-Fi clients.	V	V

Limitation of Settings

N/A