USG210 - WiFI client unable to reach the DHCP from VLAN

dpower
dpower Posts: 3  Freshman Member
First Comment
edited April 2021 in Security
Hi guys, I'm trying to achieve multi SSID network schema with USG210 and NWA5123. 
I had follow this example: https://businessforum.zyxel.com/discussion/1631/multi-ssid-how-make-it
But Wifi client can connect to the SSID and cannot get an address from the DHCP Pool. 
Please advise:) 

Comments

  • Ian31
    Ian31 Posts: 174  Master Member
    5 Answers First Comment Friend Collector Sixth Anniversary
    dpower,
    What's the ZONE of your vlan interface ?
    Do you add the firewall rule to allow the vlan ZONE to ZyWALL UDP port 67 (DHCP server) ?

  • dpower
    dpower Posts: 3  Freshman Member
    First Comment
    The problem with DHCP was the switch. 
    But still I cannot get address from the correct vlan. From the WiFi I get always address from the default vlan1. If I try to connect to the same lan of the AP from my laptop with configured vlan (in example vlan10) - I can get address from the correct DHCP from vlan10. 
    What it can be?
  • Ian31
    Ian31 Posts: 174  Master Member
    5 Answers First Comment Friend Collector Sixth Anniversary
    The switch ports connect to USG and AP need to transfer tagged frame in and out for vlan10.
    In your case,
    client--->SSID (AP)<--->vlan10 tagged frame<--->siwtch<--->vlan10 tagged frame<--> (vlan10)USG

  • dpower
    dpower Posts: 3  Freshman Member
    First Comment
    The guiding questions from your side helped me. Thanks a lot!

Security Highlight