SSL VPN with secuextender not working
I have setup an SSL vpn on my USG40 following this tutorial.
https://support.zyxel.eu/hc/en-us/articles/360001390774-How-to-create-an-SSL-VPN-Tunnel-via-SecuExtender-software-
I can establish a connection with the Secu-extender, but I can't reach a device on my LAN1 network, even the SSL pool gateway 192.168.200.1.
If I check the assigned IP on TAP Adapter look strang3e...
Firmware V4.32(AALA.0) / 2018-07-12 17:13:23
Secure extender 4.0.3.0
SSL GATEWAY: 192.168.200.1
SSL POOL IP: 192.168.200.100 - 192.168.200.120
Remote network LAN1: 10.0.1.0/24



https://support.zyxel.eu/hc/en-us/articles/360001390774-How-to-create-an-SSL-VPN-Tunnel-via-SecuExtender-software-
I can establish a connection with the Secu-extender, but I can't reach a device on my LAN1 network, even the SSL pool gateway 192.168.200.1.
If I check the assigned IP on TAP Adapter look strang3e...
Firmware V4.32(AALA.0) / 2018-07-12 17:13:23
Secure extender 4.0.3.0
SSL GATEWAY: 192.168.200.1
SSL POOL IP: 192.168.200.100 - 192.168.200.120
Remote network LAN1: 10.0.1.0/24



0
Best Answers
-
I got the same issue and found this FAQ.Set subnet in "Assign IP Pool" and the issue is resolved.1
-
jasailafan said:I got the same issue and found this FAQ.Set subnet in "Assign IP Pool" and the issue is resolved.0
All Replies
-
I got the same issue and found this FAQ.Set subnet in "Assign IP Pool" and the issue is resolved.1
-
jasailafan said:I got the same issue and found this FAQ.Set subnet in "Assign IP Pool" and the issue is resolved.0
Categories
- All Categories
- 431 Beta Program
- 2.6K Nebula
- 166 Nebula Ideas
- 112 Nebula Status and Incidents
- 6K Security
- 366 USG FLEX H Series
- 293 Security Ideas
- 1.5K Switch
- 78 Switch Ideas
- 1.2K Wireless
- 42 Wireless Ideas
- 6.7K Consumer Product
- 264 Service & License
- 408 News and Release
- 87 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.9K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 83 Security Highlight