WAX620D controlled by USG40 - possible?

SpaceCowboy
SpaceCowboy Posts: 8  Freshman Member
First Comment Fifth Anniversary
edited June 20 in Security

Hello

I am having a hard time registering a WAX620D on a USG40 as controller. The USG40 sees the WX620D and I can add it to the controlled group.

However, the icon stays gray and I cannot manage the accesspoint.

Any ideas?

Thanks

—Thomas

Accepted Solution

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,291  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @SpaceCowboy,

    The APC version of USG 40's latest firmware(V4.73(AALA.1)C0) is APC3.60. In this APC version, the firewall only supports these AP models:

    NWA3160-N, NWA3550-N, NWA3560-N, NWA5160N, NWA5550-N, NWA5560-N, NWA5121-NI, NWA5123-NI, NWA5121-N, NWA5301-NJ, NWA5123-AC, WAC5302D-S, WAC6103D-I, WAC6502D-E, WAC6502D-S, WAC6503D-S, WAC6553D-E, WAC6552D-S, NWA5123-AC-HD, WAC6303D-S, WAX650S, WAX510D, WAX610D, WAC500, WAC500H, WAC5302D-Sv2

    You may reference the datasheet:

    https://download.zyxel.com/USG40/firmware/USG40_4.73(AALA.1)C0_2.pdf

    In addition, USG 40 is an end-of-life model. If you want the WAX620D controlled by a firewall, you may consider migrating to USG FLEX 100.

    https://webservice.zyxel.com/end-of-life

All Replies

  • PeterUK
    PeterUK Posts: 3,316  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited June 19

    It is only supported on newer USG models not sure if thats just the firmware update only.

    when you add AP to USG you manage it by USG

    Have you allowed from LAN to zywall UDP ports 2018, 5246

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,291  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @SpaceCowboy,

    The APC version of USG 40's latest firmware(V4.73(AALA.1)C0) is APC3.60. In this APC version, the firewall only supports these AP models:

    NWA3160-N, NWA3550-N, NWA3560-N, NWA5160N, NWA5550-N, NWA5560-N, NWA5121-NI, NWA5123-NI, NWA5121-N, NWA5301-NJ, NWA5123-AC, WAC5302D-S, WAC6103D-I, WAC6502D-E, WAC6502D-S, WAC6503D-S, WAC6553D-E, WAC6552D-S, NWA5123-AC-HD, WAC6303D-S, WAX650S, WAX510D, WAX610D, WAC500, WAC500H, WAC5302D-Sv2

    You may reference the datasheet:

    https://download.zyxel.com/USG40/firmware/USG40_4.73(AALA.1)C0_2.pdf

    In addition, USG 40 is an end-of-life model. If you want the WAX620D controlled by a firewall, you may consider migrating to USG FLEX 100.

    https://webservice.zyxel.com/end-of-life

  • SpaceCowboy
    SpaceCowboy Posts: 8  Freshman Member
    First Comment Fifth Anniversary

    Thank you for your help!

    I will suggest to upgrade the firewall

    —Thomas

Security Highlight