Zyxel USG20-VPN Enable LAN1 using CLI

Jeff_ATS
Jeff_ATS Posts: 11  Freshman Member
First Comment Third Anniversary
edited July 16 in Security

I accidently disabled LAN1 on the GUI and I do not have SSl Web Access enabled, what CLI command can I use to enable LAN1?

Best Answers

All Replies

  • PeterUK
    PeterUK Posts: 3,461  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    Answer ✓

    I think its

    configure terminal
    interface lan1
    no shutdown
    

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,577  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    edited July 16 Answer ✓

    Hi @Jeff_ATS,

    You may use show interface all to make sure the interface's name that you disabled and reference @PeterUK's example command to enable.

    For more information about the CLI command, please reference our CLI reference guide:

    https://download.zyxel.com/USG20-VPN/cli_reference_guide/USG20-VPN_V5.37.pdf

    Zyxel Melen


  • Jeff_ATS
    Jeff_ATS Posts: 11  Freshman Member
    First Comment Third Anniversary

    Thank you all! Took a while to get the correct console cable

    Welcome to USGFLEX 50

    Username:admin

    Password:

    Router> show interface all

    No. Name            Status              IP Address      Mask            IP Assignment

    ===============================================================================

    1   wan             100M/Full           xxx.xxx.xxx.xxx   255.255.255.248 Static

    2   sfp             Down                0.0.0.0         0.0.0.0         Static

    3   lan1            Inactive            0.0.0.0         0.0.0.0         Static

    4   lan2            Down                192.168.2.1     255.255.255.0   Static

    5   Classroom       Down                192.168.3.1     255.255.255.0   Static

    6   Chemical        Down                192.168.5.1     255.255.255.0   Static

    Router> configure terminal

    Router(config)#interface lan1

    Router(config-if-lan1)#no shutdown

    Router(config-if-lan1)#exit

    Router(config)#exit

    Router# show interface all

    No. Name            Status              IP Address      Mask            IP Assignment

    ===============================================================================

    1   wan             100M/Full           xxx.xxx.xxx.xxx   255.255.255.248 Static

    2   sfp             Down                0.0.0.0         0.0.0.0         Static

    3   lan1            Up                  192.168.1.251   255.255.255.0   Static

    4   lan2            Down                192.168.2.1     255.255.255.0   Static

    5   Classroom       Down                192.168.3.1     255.255.255.0   Static

    6   Chemical        Down                192.168.5.1     255.255.255.0   Static

    Router# exit

    Welcome to USGFLEX 50

    Username:

Security Highlight