Switch Zyxel GS1200-5 pinging, but no web ui

firefaced

Hi!

I'm trying to setup switch to make a 2Gb/s bond, but I cannot access Web UI at all.

Everything else is working.

I can ping 192.168.1.3.

The network with NAS is working, but its slow.

I have IP 192.168.1.10 and 192.168.1.100 for my PC and my NAS

I tried everything, turning off all LAN cables except my PC, turning WIFI on/off, changing IP to 192.168.1.4, resetting the switch. Nothing works 8(

Telnet is not connecting

What can i do? Maybe I can somehow upgrade firmware without web ui?

Zyxel_Nami

Hi @firefaced

There might be an IP conflict in your environment. Please try isolating the PC and switch by disconnecting all other devices from the switch.

Then, set your PC to a static IP of 192.168.1.10 and connect it directly to the switch. Try accessing the switch via the IP address 192.168.1.3.

Zyxel_Nami

Hi @firefaced

Is the switch connected to a DHCP server? If so, please check the DHCP table for the switch's IP address.

firefaced

No switch is not connected to any server. All IPs are static. It connects PC to NAS.

Web UI worked a while ago, now it's not

Zyxel_Nami

Hi @firefaced

There might be an IP conflict in your environment. Please try isolating the PC and switch by disconnecting all other devices from the switch.

Then, set your PC to a static IP of 192.168.1.10 and connect it directly to the switch. Try accessing the switch via the IP address 192.168.1.3.

firefaced

Hi Nami!

I turned off WIFI dongle and Bluetooth dongle, and it worked. Guess one of that things was conflicting with 192.168.1.3

Thank you! 8)