[Release Note] Zyxel Access Point - V7.10(ACGG.2)C0 firmware has been released

Zyxel_Melen

Access Points Firmware Release Note 

March 2025

Overview

This document provides firmware release information on Zyxel Access Points platforms, introduce new Access Points, new features and enhancements, bug fix, known issues and workarounds information for Release V7.10 Patch 2 C0.

Supported Platforms

(Click Hyperlink to download the firmware directly)

WiFi 7 model(s):

Zyxel WBE660S - V7.10(ACGG.2)C0

Zyxel WBE630S - V7.10(ACLW.2)C0

Zyxel WBE530 - V7.10(ACLE.2)C0

Zyxel WBE510D - V7.10(ACLX.2)C0

Zyxel NWA210BE - V7.10(ACLY.2)C0

Zyxel NWA110BE - V7.10(ACLZ.2)C0

Zyxel NWA130BE - V7.10(ACIL.2)C0

WiFi 6 model(s):

Zyxel NWA90AX PRO - V7.10(ACGF.2)C0

Zyxel NWA50AX PRO - V7.10(ACGE.2)C0

New Features and Enhancements

1. The initial SSID on the Zyxel device now supports NAT mode. 

2. The local GUI initial setup wizard now includes a deployment mode selection feature. Depending on your device model, you can choose between standalone mode, cloud managed mode, or controller managed mode. This enhancement simplifies configuration by providing an intuitive setup experience customized for each management approach.

Bug Fix

C=Cloud mode, M=Managed, S=Standalone mode

Bug fix	C	M	S
1. [eITS: 250101234] [Symptom] Wireless clients failed to connect to the SSID with WPA3 security and MAC authentication.	V	V	V
2. [SPRID: 250113159] [Symptom] The MLO (Multi-Link Operation) on SSID and smart mesh MLO feature are malfunctioning on the following models: NWA110BE, NWA210BE, WBE510D, and WBE630S.	V	-	-

Known Issue

C=Cloud mode, M=Managed, S=Standalone mode

Known Issue	C	M	S
1. [SPRID: 240820168] [Symptom] When enabling MLO, the WPA2/3- Enterprise security mode may occasionally fail to convert to WPA3.	V	-	-
2. [SPRID: 240913082] [Symptom] Stations cannot authenticate when an SSID is configured with MLO (2.4G+5G bands) and the security mode is set to WPA3 with MAC Authentication via RADIUS.	V	-	-
3. [SPRID: 241202036] [Symptom] When the Repeater AP reaches the Wireless Health threshold, the non-mesh bands will not act.	V	-	-
4. [SPRID: 241203097] [Symptom] When the Mesh topology consists of a non-supported MLO Root combined with MLO Repeater Hop1 and Hop2, it may affect the Repeater's downlink and cause issues with the service VAP lacking MLO functionality.	V	-	-
5. [SPRID: 241216264] [Symptom] When the WAC5302D-Sv2 model is used as the Root in a Mesh setup, and Wi-Fi 7 series models with firmware versions 7.00 & 7.10 are used as Repeaters, the Mesh connection cannot be established.	V	-	-
6. [SPRID: 241219349] [Symptom] The 'By Traffic Level' option incorrectly appears in the Load Balancing section of the GUI.	-	-	V
7. [SPRID: 241219350] [Symptom] The wireless monitoring data exhibits abnormal behavior.	V	-	-

Limitation of Settings

N/A