ATP200, SFP to Lan Port?





Hi
My Home Server is hooked directly to the SFP Port on my ATP. The ATP is the DHCP Server for a bunch of Virtual Machines. Now I have to move them somehow to an Server who is connect lets say Lan Port 1 (= P4). For that reason I set up LAN2 and under "DHCP Setting" I choose DHCP Relay and in "Relay Server 1" I put in the IP from the SFP DHCP like 192.168.100.1
When I activate the Rule the hole System drive insane and not asign any IP Adress to any network anymore.
So what is the correct way?
Thanks
All Replies
-
May I know your DHCP server is based on which OS? Linux or Windows Server?
Zyxel Melen1 -
It is the DHCP Server from sfp Port.
0 -
Hi
Sorry for the late replay I try to ex plane it again.
Here is how the SFP Port config: It is "just" the DHCP Server actived.Here on Picture 2 is the Lan2 who I can config to be on the Physical Lan Ports.
Do I need to set "DHCP Relay" that for example when I put LAN 2 on Port 7 that a Pc who is pluged into Port 7 get a IP Adress from the "SFP" DHCP Server Pool?
Thanks0 -
The SFP can not port role with LAN2
LAN2 can only port role with other ethernets
To expand the SFP network you will need a switch to it
0 -
Does "DHCP Relay" not work in that case?
0
Categories
- All Categories
- 434 Beta Program
- 2.7K Nebula
- 174 Nebula Ideas
- 117 Nebula Status and Incidents
- 6.1K Security
- 418 USG FLEX H Series
- 297 Security Ideas
- 1.6K Switch
- 78 Switch Ideas
- 1.2K Wireless
- 43 Wireless Ideas
- 6.7K Consumer Product
- 270 Service & License
- 416 News and Release
- 87 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.1K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 83 About Community
- 87 Security Highlight