VLANs Setup on Flex 500H

jayd691
jayd691 Posts: 22  Freshman Member
Zyxel Certified Network Administrator - Security Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula
in USG FLEX H Series

I am trying to set up my Flex 500H with 5 Vlans, all using separate ports instead of router-on-a-stick style.

Can someone assist me with the setup on the Flex 500H (I am a previous Cisco guy).

How do I setup the base ports (ip addresses, etc)?

I will use one vlan for management, and can set up the vlans but do not know how to setup all the base ports such as do they need their own ip addresses? If so, do I use one subnet for the base ports (192.168.1.2, 192.168.1.3, 192.168.1.5, 192.168.1.5)?

Any help will be greatly appreciated. Thank you.

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 3,303  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate

    Hi @jayd691

    VLAN is based on ethernet interface, so, please ensure each port are ethernet interface member (ge3 and ge4 in my example video). Then, add VLAN interface for specific port.

    https://jam.dev/c/441033e0-2040-4f6d-b689-886a080349ad

    You can assign IP address for the VLAN interface or not. And different VLAN interfaces will have different IP addresses and subnet ranges.

    Hope it helps.

    Zyxel Melen


  • PeterUK
    PeterUK Posts: 3,801  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary

    From what I read its like you want many VLAN's on the same subnet?

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）