H series 1.35 Patch1 - Missing Mac filtering for SSIDs

GiuseppeR · August 24

Hello everyone,

using Flex/ATP series you can configure specific MAC filtering for specific SSID.

For example you can set more SSIDs with optional deny/allow lists.

Where the same function is on Flex H series with latest firmware?

Have a nice evening

Zyxel_Lynn · August 26

Hi @GiuseppeR ,

To configure MAC filtering for specific devices on H series, please follow these steps:

Step 1: Navigate to Policy Clients

Go to Wireless > WLAN Clients > Policy Clients.

Click the "Add Policy Clients" button.

Step 2

A configuration window will appear.

Click the "Add MAC" button

Step 3: Add Device MAC Address for specific policy

A new input window will open.

Enter the MAC address of the target device.

Select the desired policy type:

Block Policy - Prevents the device from connecting

To Specific SSID - Restricts the device to a particular network

Apply the settings to activate the policy.

This is how to configure the MAC filtering feature on H series devices. If you have any questions or need additional assistance, please don't hesitate to contact our support team.

Best Regard,

Lynn

GiuseppeR · August 27

Hi @Zyxel_Lynn

I have see that area, but there you can set a specific MAC address to enter or not a specific SSID.

But you have to know the MAC address to block its pairing to a SSID.

And if you have unknow MAC addresses?

What I'm looking for is the "old style" MAC filtering, that was more efficient: everything blocked except listed MAC addresses for specific SSIDs.

Zyxel_Lynn · September 5

Hi @GiuseppeR ,

The H series allows SSID-specific MAC filtering through the Policy Client Configuration window. After entering a device's MAC address and selecting 'To specific SSID' policy, you can choose Normal (allow access) or Block (deny access) for that specific wireless network.