[Release Note] Zyxel BE series Access Point - V7.20 Patch 2 firmware has been released

Zyxel_Melen
Posts: 3,726
Zyxel Employee





BE series Access Points Firmware Release Note
September 2025
Overview
This document provides firmware release information on Zyxel Access Points platforms, introduce new Access Points, new features and enhancements, bug fix, known issues and workarounds information for Release V7.20 Patch 2 C0.
Supported Platforms
(Click Hyperlink to download the firmware directly)
WiFi 7 model(s):
Zyxel WBE660S - V7.20(ACGG.2)C0
Zyxel WBE630S - V7.20(ACLW.2)C0
Zyxel WBE530 - V7.20(ACLE.2)C0
Zyxel WBE510D - V7.20(ACLX.2)C0
Zyxel NWA210BE - V7.20(ACLY.2)C0
Zyxel NWA110BE - V7.20(ACLZ.2)C0
Zyxel NWA130BE - V7.20(ACIL.2)C0
New Features and Enhancements
N/ABug Fix
C=Cloud mode, M=Managed, S=Standalone mode
Bug fix | C | M | S |
[eITS: 250800183, 250800762, 250800398] [Symptom] WiFi 7 AP Unexpected Reboot Problem After 7.20p1 Upgrade | V | V | V |
Known Issue
C=Cloud mode, M=Managed, S=Standalone mode
Known Issue | C | M | S |
1. [SPRID: 240913082] [Symptom] Stations cannot authenticate when an SSID is configured with MLO (4G+5G bands) and the security mode is set to WPA3 with MAC Authentication via RADIUS. | V | - | - |
2. [SPRID: 241216264] [Symptom] When the WAC5302D-Sv2 model is used as the Root in a Mesh setup, and Wi-Fi 7 series models with firmware versions 00 & 10 are used as Repeaters, the Mesh connection cannot be established. | V | - | - |
3. [SPRID: 241219350] [Symptom] The wireless monitoring data exhibits abnormal behavior. | V | - | - |
4. [SPRID: 250402043] [Symptom] Bug fix Cloud Managed Standalone When an MLO client connects to the SSID, the authentication field of client page does not display voucher. | V | - | - |
5. [SPRID: 250402050] [Symptom] Under this configuration combination : Sign-on with my RADIUS enabled along with MAC authentication fallback. The behavior of MLO clients after connecting may not be as expected: a. Traffic does not pass through (no connectivity) b. Client remains online after reconnecting, even without re- authentication c. After completing MAC authentication, the client is redirected to the captive portal | V | - | - |
6. [SPRID: 250627398] [Symptom] 5G radio is 11be mode + MLO enabled + security is enhance open, after wireless client which support enhance open security connected the SSID field of client list will show SSID name(transition mode) | V | V | V |
7. [SPRID: 250714115] [Symptom] After the wireless STA connects to the initial SSID, the AP's web GUI is accessible, but pinging the AP's IP Bug fix Cloud Managed Standalone address fails. | V | V | V |
8. [SPRID: 241106062] [Fast Roaming] [Symptom] The station experienced a disconnection caused by a reauthentication failure that occurred immediately after its first fast roaming event. | V | - | V |
9. [SPRID: 241203097] [Symptom] When the Mesh topology consists of a non-supported MLO Root combined with MLO Repeater Hop1 and Hop2, it may affect the Repeater's downlink and cause issues with the service VAP lacking MLO functionality. | V | - | - |
10. [WBE630/WBE510/NWA110BE/NWA210BE] [Symptom] The access point may reboot unexpectedly when the 2.4GHz radio is configured in BE mode. To prevent this, the 2.4GHz radio mode has been converted to AX mode. | V | V | V |
Limitation of Settings
N/A
Zyxel Melen
1
Categories
- All Categories
- 438 Beta Program
- 2.7K Nebula
- 189 Nebula Ideas
- 121 Nebula Status and Incidents
- 6.2K Security
- 458 USG FLEX H Series
- 304 Security Ideas
- 1.6K Switch
- 81 Switch Ideas
- 1.3K Wireless
- 44 Wireless Ideas
- 6.8K Consumer Product
- 279 Service & License
- 438 News and Release
- 88 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.3K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 91 Security Highlight