[Release Note] Zyxel Access Point - V7.25 Patch 2 firmware has been released

Zyxel_Melen

Access Points Firmware Release Note 

November 2025

Overview

This document provides firmware release information on Zyxel Access Points platforms, introduce new Access Points, new features and enhancements, bug fix, known issues and workarounds information for Release V7.25 Patch 2 C0.

Supported Platforms

(Click Hyperlink to download the firmware directly)

WiFi 7 model(s):

Zyxel NWA30BE - V7.25(ACPI.2)C0

Zyxel NWA50BE - V7.25(ACPB.2)C0

Zyxel NWA50BE PRO - V7.25(ACPC.2)C0

Zyxel NWA55BE - V7.25(ACPH.2)C0

Zyxel NWA90BE - V7.25(ACPD.2)C0

Zyxel NWA90BE PRO - V7.25(ACPE.2)C0

Zyxel IAP500BE - V7.25(ACPJ.2)C0

New Features and Enhancements

N/A

Bug Fix

C=Cloud mode, M=Managed, S=Standalone mode

Bug fix	C	M	S
1. [eITS: 250800182] [Symptom] NWA130BE experiences a boot loop when the iPhone 16 Pro is set to 6E "automatic mode."	V	V	V
2. [SPRID: 250900204] [Symptom] NWA130BE became offline suddenly caused by netopeer- server coredump.	V	V	V
3. [SPRID: 250900477 ] [Symptom] The station list in standalone mode does not sort entries based on both date and time; instead, it sorts only by time and completely disregards the date.	-	-	V
4. [SPRID: 250601637] [Symptom] The wireless station failed to include the two PMKIDs during fast roaming, resulting in a roaming failure blocked by the hostapd handshake process.	V	-	-
5. [RMID:63812 ] [Symptom] [wireless bridge] [IAP500BE] Topology USG-Root )))((( Repeater---client AP [Steps] a. Change the Root and Repeater’s management VLAN to VLAN 10 (tagged). b. Enable Smart Mesh and set up the Smart Mesh environment. c. Go to Wireless → Access Points → AP List → Edit AP (IAP500), and enable Wireless Bridge, and configuring VLAN 1 and 10. d. Then go to Wireless → WLAN Settings → AP Settings → IAP500, and modify the Wireless Bridge VLAN to include VLAN 1, 10, 4094, and 100. e. Change the VLAN of the client AP connected behind the repeater to VLAN 100 (tagged). [Result] The client AP behind the repeater fails to obtain an IP address.	-	V	-

Known Issue

C=Cloud mode, M=Managed, S=Standalone mode

Known Issue	C	M	S
1. [RMID: 65019] [Symptom] Abnormal display of loading status for 2.4 GHz — 2.4 GHz always shows as -.	-	V	-
2. [RMID: 64436] [topology] mlo root )))((( mlo repeater [Symptom] When a tri-band WiFi 7 repeater is manually configured to use a dual-band WiFi 7 root as its uplink, it can only connect to one band.	V	-	-
3. [RMID:64381 ] [Symptom] If all radios on the repeater are operating in ax mode and it successfully connects to the uplink, the indicator icon on Nebula will show a solid green light.	V	-	-
4. [RMID: 64099] [Application Visibility] [Symptom] All AP models with MLO supported have this issue. Real-time bandwidth limitation changes — STA connection actual test not restricted. [Steps] a. Add the AP to a site. b. Enable Application Visibility. c. Set File Sharing to be limited to 1 Mbps. d. Connect a wireless station and test FTP upload/download. → Upload and download are correctly limited to 1 Mbps. e. Keep the wireless station connected, then change the File Sharing limit to 15 Mbps. f. Test FTP upload/download again. [Result] FTP upload and download are not limited; to resolve this issue, the wireless station needs to reconnect.	V	-	-
5. [RMID: 63816] [Symptom] When an MLO client connects to the AP using both 2.4 GHz and 5 GHz links, you will see two entries for the same client on the WLAN Clients page.	-	V	-
6. [RMID: 63221] [Symptom] [IAP500BE] When a new AP is opened from the box and powered on via PoE but fails to obtain an IP address, it automatically switches to repeater mode. During its attempt to connect to the uplink, a system hang occurs. The AP must be rebooted and should be able to obtain an IP address to provide the service.	V	-	-

Limitation of Settings

N/A