[Release Note] Zyxel BE Series Access Point - V7.30 Patch 3 firmware has been released

Zyxel_Melen

BE Series Access Points Firmware Release Note 

February 2026

Overview

This document provides firmware release information on Zyxel Access Points platforms, introduce new Access Points, new features and enhancements, bug fix, known issues and workarounds information for Release V7.30 Patch 3 C0.

Supported Platforms

(Click Hyperlink to download the firmware directly)

WiFi 7 model(s):

Zyxel WBE660S - V7.30(ACGG.3)C0

Zyxel WBE630S - V7.30(ACLW.3)C0

Zyxel WBE530 - V7.30(ACLE.3)C0

Zyxel WBE510D - V7.30(ACLX.3)C0

Zyxel NWA210BE - V7.30(ACLY.3)C0

Zyxel NWA110BE - V7.30(ACLZ.3)C0

Zyxel NWA130BE - V7.30(ACIL.3)C0

Zyxel NWA90BE PRO - V7.30(ACPE.3)C0

Zyxel NWA50BE PRO - V7.30(ACPC.3)C0

Zyxel WBE665S - V7.30(ACQJ.2) (first firmware version)

Zyxel NWA240BE - V7.30(ACQG.2) (first firmware version)

Zyxel FWA7 Root Plus - V7.30(ACQL.2) (first firmware version)

Zyxel FWA7 Leaf Plus - V7.30(ACQK.2) (first firmware version)

New Features and Enhancements

N/A

Bug Fix

C=Cloud mode, M=Managed, S=Standalone mode

Bug fix	C	M	S
1. [RMID: 67335] [Symptom] The 6 GHz capability is not available when the device operates as a WDS or Smart Mesh repeater.	V	V	V

Known Issue

C=Cloud mode, M=Managed, S=Standalone mode

Known Issue	C	M	S
1. [SPRID: 240913082] [Symptom] Stations cannot authenticate when an SSID is configured with MLO (4G+5G bands) and the security mode is set to WPA3 with MAC Authentication via RADIUS.	V	-	-
2. [SPRID: 241216264] [Symptom] When the WAC5302D-Sv2 model is used as the Root in a Mesh setup, and WiFi 7 series models with firmware versions 00 & 10 are used as Repeaters, the Mesh connection cannot be established.	V	-	-
3. [RMID: 66894] [Symptom] When the WBE665S is in Standalone mode, configuration changes may not be applied when using the Wizard.	-	-	V
4. [RMID: 66666] [Symptom] When the WBE665S operates in Standalone mode with Indoor mode enabled, rebooting the AP may trigger an ERROR related to system-log suppression, causing the AP to apply lastgood.conf.	-	-	V
5. [RMID: 66414] [Symptom] Proxy ARP function not working for MLO STA connected on 5 GHz.	-	-	V
6. [RMID: 65938] [Symptom] [Dynamic VLAN] The STA connects to an AP and obtains an IP address via a dynamic VLAN. STA traffic is not passing after the STA triggers roaming.	V	-	-
7. [RMID: 64372] [Symptom] When using an SNMP MIB tool to perform an SNMP SET operation on the sysName OID, the SET request reports success; however, the System Name is not updated in the GUI.	-	-	V
8. [RMID: 64164] [Symptom] AP status show vlan conflict when Force Overwrite VLAN Config is enabled [Steps] a. AP MGMT > AP Group > Edit Group b. Force Overwrite VLAN Config: Enable MGMT VALN ID: 10 c. As Native VLAN: Enable [Result] AP MGMT > Mgmt. AP List AP show vlan conflict and Mgnt. VLAN ID(AC/AP) show 1	-	V	-

Limitation of Settings

1. [SPRID: 241203097] [Symptom] When the Mesh topology consists of a non-supported MLO Root combined with MLO Repeater Hop1 and Hop2, it may V - - affect the Repeater's downlink and cause issues with the service VAP lacking MLO functionality.