[Release Note] Zyxel BE Series Access Point - V7.30 Patch 4 firmware has been released

Zyxel_Melen

BE Series Access Points Firmware Release Note 

April 2026

Overview

This document provides firmware release information on Zyxel Access Points platforms, introduce new Access Points, new features and enhancements, bug fix, known issues and workarounds information for Release V7.30 Patch 4 C0.

Supported Platforms

(Click Hyperlink to download the firmware directly)

WiFi 7 model(s):

Zyxel WBE660S - V7.30(ACGG.4)C0

Zyxel WBE630S - V7.30(ACLW.4)C0

Zyxel WBE510D - V7.30(ACLX.4)C0

Zyxel NWA240BE - V7.30(ACQG.4)C0

Zyxel NWA210BE - V7.30(ACLY.4)C0

Zyxel NWA110BE - V7.30(ACLZ.4)C0

Zyxel NWA130BE - V7.30(ACIL.4)C0

Zyxel NWA90BE PRO - V7.30(ACPE.4)C0

Zyxel NWA90BE - V7.30(ACPD.4)C0

Zyxel NWA55BE - V7.30(ACPH.4)C0

Zyxel NWA50BE PRO - V7.30(ACPC.4)C0

Zyxel NWA50BE - V7.30(ACPB.4)C0

Zyxel NWA30BE - V7.30(ACPI.4)C0

Zyxel IAP500BE - V7.30(ACPJ.4)C0

Zyxel NWA210AXv2 - V7.30(ACSR.4)C0

New Features and Enhancements

N/A

Bug Fix

C=Cloud mode, M=Managed, S=Standalone mode

Bug fix	C	M	S
1. [eITS: 251200071] [Symptom] The AP may occasionally not broadcast the SSID after rebooting.	V	V	V
2. [eITS: 251101883] [Symptom] Experience AP main hostapd coredump event.	V	V	V
3. [eITS: 260201067] [Symptom] HTTP access remains accessible even when both HTTP and HTTPS protocols are simultaneously disabled.	V	V	V
4. [eITS: 250900272, 251102054, 251200071, 251200171, 251201524, 260101619, 260300356, 260301027, 260301359] [Symptom] Wireless clients connected to the AP may fail to obtain an DHCP IP address.	V	V	V
5. [eITS: 260201354] [Symptom] 5GHz and 6GHz clients cannot obtain a DHCP IP on particular SSIDs, while clients connect to same SSID 2.4GHz band works normally.	V	-	-
6. [RMID: 64164] [Symptom] AP status show vlan conflict when Force Overwrite VLAN Config is enabled [Steps] a. AP MGMT > AP Group > Edit Group b. Force Overwrite VLAN Config: Enable MGMT VALN ID: 10 c. As Native VLAN: Enable [Result] AP MGMT > Mgmt. AP List AP show vlan conflict and Mgnt. VLAN ID(AC/AP) show 1.	-	V	-

Known Issue

C=Cloud mode, M=Managed, S=Standalone mode

Known Issue	C	M	S
1. [SPRID: 240913082] [Symptom] Stations cannot authenticate when an SSID is configured with MLO (2.4G+5G bands) and the security mode is set to WPA3 with MAC Authentication via RADIUS.	V	-	-
2. [SPRID: 241216264] [Symptom] When the WAC5302D-Sv2 model is used as the Root in a Mesh setup, and WiFi 7 series models with firmware versions 7.00 & 7.10 are used as Repeaters, the Mesh connection cannot be established.	V	-	-
3. [RMID: 66414] [Symptom] Proxy ARP function not working for MLO STA connected on 5 GHz.	-	-	V
4. [RMID: 65938] [Symptom] [Dynamic VLAN] The STA connects to an AP and obtains an IP address via a dynamic VLAN. STA traffic is not passing after the STA triggers roaming.	V	-	-
5. [RMID: 64372] [Symptom] When using an SNMP MIB tool to perform an SNMP SET operation on the sysName OID, the SET request reports success; however, the System Name is not updated in the GUI.	-	-	V
6. [RMID: 68007] [Symptom]When operating as a repeater, the NWA210AXv2 can only connect to the root AP via 2.4GHz.	V	-	V

Limitation of Settings

1. [SPRID: 241203097] [Symptom] When the Mesh topology consists of a non-supported MLO Root combined with MLO Repeater Hop1 and Hop2, it may affect the Repeater's downlink and cause issues with the service VAP lacking MLO functionality.