Conversion cfg. from Flex100 to Flex200H

QComp63

Is there a way to convert a configuration from Flex100 to Flex200H? Unfortunately, the Configuration Converter is not even able to convert cf. Flex100 to Flex100H

Zyxel_Melen

Hi @QComp63

Please try this method:

1.Remove these from the backup startup-config file.

! saved at xxxx-xx-xx xx:xx:xx

! model: USG FLEX 100

! firmware version: 5.42(ABUH.0)

2. Select USG FLEX 200 instead of USG FLEX 100.

3. Upload the edited startup-config file and click convert.

Hope this helps.

PeterUK

Its not as bad as you think to have a working Flex100 you have access too to then configure a new FLEX H manually

Zyxel_Melen

Hi @QComp63

Please try this method:

1.Remove these from the backup startup-config file.

! saved at xxxx-xx-xx xx:xx:xx

! model: USG FLEX 100

! firmware version: 5.42(ABUH.0)

2. Select USG FLEX 200 instead of USG FLEX 100.

3. Upload the edited startup-config file and click convert.

Hope this helps.