I can't reset switch zyxel GS1910-48 ?

Options
iwladim
iwladim Posts: 8
First Comment
image  Freshman Member

I don't have the password.
The reset button doesn't work.
The console port doesn't work.
The Zyxel ZON Utility doesn't work.
What can I do?

«1

All Replies

  • PeterUK
    PeterUK Posts: 4,829
    250 Answers 2500 Comments Friend Collector Ninth Anniversary
    image  Guru Member
    edited November 3
    Options

    The console port should work by 9600 speed

    GS1910-24 console via factory settings
    To reset the ZyXEL GS1910-24 console port, follow these steps:
    Connect to the console port using a computer with terminal emulation software.
    Disconnect and reconnect the Switch's power to begin a session.
    When you see the message "Executing boot script in 3.000 seconds - enter ^C to abort", press the Ctrl-c key combination to stop the automatic boot.
    Type "default" after the "Erase from 0x40080000-0x4017ffff: ................" message.
    Type "reset" after the RedBoot> prompt.
    After the switch restarts, you can use the default username admin and password 1234 to log in. For more detailed instructions, refer to the ZyXEL GS1910/XGS1910 Series User's Guide.
  • iwladim
    iwladim Posts: 8
    First Comment
    image  Freshman Member
    Options

    I’ve tried 9600 and 15200. Nothing but a black screen. I tried using PuTTY, MobaXterm, and even HyperTerminal—still nothing!

  • PeterUK
    PeterUK Posts: 4,829
    250 Answers 2500 Comments Friend Collector Ninth Anniversary
    image  Guru Member
    Options

    At the black screen did you press the enter key?

  • iwladim
    iwladim Posts: 8
    First Comment
    image  Freshman Member
    Options

    Enter key, Ctrl+C, any key—and nothing!!

  • PeterUK
    PeterUK Posts: 4,829
    250 Answers 2500 Comments Friend Collector Ninth Anniversary
    image  Guru Member
    Options

    Seems like its dead? Or at least the console port is?

    Have you checked your console hookup works to another device?

  • Zyxel_Tina
    Zyxel_Tina Posts: 1,074
    Zyxel Certified Network Administrator - Security Zyxel Certified Network Administrator - Switch 250 Answers 1000 Comments
    image  Zyxel Employee
    Options

    Hi @iwladim,

    Please note that the GS1910-48 has reached its End-of-Life (EoL) status, meaning that our support for this model are limited.

    If you have tested both 115200 and 9600 baud rates and confirmed that the console cable and pin connections are correct, but still cannot establish a console session, there may be an issue with the switch itself or its console interface.

    Given the age and EoL status of this model, we recommend considering a replacement with one of our currently supported switch models to ensure ongoing product support and a more reliable network experience.

    You can explore our current switch product lineup here:
    Zyxel Networks – Switch

    Zyxel Tina

  • iwladim
    iwladim Posts: 8
    First Comment
    image  Freshman Member
    Options

    The switch is operational and has several VLANs configured, but I do not have access to the configuration; it must be reset in order to make any changes.

    I have tested my computer with a different switch, and it connects perfectly to the console port.

  • iwladim
    iwladim Posts: 8
    First Comment
    image  Freshman Member
    Options

    Yes, the equipment is being upgraded, but these devices will be relocated to another site. There are 6 switches that are currently functioning without any issues, so I cannot discard them; for that reason, I need to reset them.

  • iwladim
    iwladim Posts: 8
    First Comment
    image  Freshman Member
    Options

    The 6 switches are the same model, and I haven't been able to reset any of them.

  • PeterUK
    PeterUK Posts: 4,829
    250 Answers 2500 Comments Friend Collector Ninth Anniversary
    image  Guru Member
    Options

    So 6 switches and you don't know there passwords? did you take over from someone?