ZyWALL as a client connecting to a VPN server

PeterUK

So I know how to do site to site and Remote Access (Server Role) but can't seem to setup the ZyWALL as a VPN client for say freel2tpvpn.com.

Or is it not possible?

Thanks

Zyxel_Charlie

@PeterUK

The first issue,the username cannot accept with "dot" on client mode.

Also, if you want toconfigure VPN tunnel interface, you need to select static IP on phase 1.

Currently, device cannot support this behavior. We will discuss and evaluate it internally.

 

Jeremylin

It seems does not possible, since the VPN remote policy can't fill FQDN(fr.freel2tpvpn.com) on Zywall.

PeterUK

Doing some testing theirs a bug for adding Enable Extended Authentication Client Mode with user name freel2tpvpn.com from saving as it has a dot.

So I got my VM setup with Remote Access (Server Role) with the following on ZyWALL 110

I then want to connect to that VPN over cellular1 on my VPN300 and this is how I set that up and the first problem is VTI does not allow Dynamic Address and the following does not connect.

Zyxel_Charlie

@PeterUK

The first issue,the username cannot accept with "dot" on client mode.

Also, if you want toconfigure VPN tunnel interface, you need to select static IP on phase 1.

Currently, device cannot support this behavior. We will discuss and evaluate it internally.