4G network slow on USG 60
Options
Hi,
I have a 4G+ router (dual band) and it works well if I use its own wifi.
However, if I connect the router by ethernet cable to the USG 60 (WAN PORT) occurs one problem: there is a very long delay for any external connection: there are many seconds (from 5 to 15) before webpage opening, or speed test starting. Once start, the speed is good (30-40 mbps).
Are there any setting on USG 60 I have to do?
I have a 4G+ router (dual band) and it works well if I use its own wifi.
However, if I connect the router by ethernet cable to the USG 60 (WAN PORT) occurs one problem: there is a very long delay for any external connection: there are many seconds (from 5 to 15) before webpage opening, or speed test starting. Once start, the speed is good (30-40 mbps).
Are there any setting on USG 60 I have to do?
0
Accepted Solution
-
@Franc
If your PC is under USG 60's lan, and access to internet in secs for the starting, you need to check your DNS setting. You could be followed it to try first.
Go to Domain Zone forwarder
Set DNS server on Lan interface
5
All Replies
-
@Franc
If your PC is under USG 60's lan, and access to internet in secs for the starting, you need to check your DNS setting. You could be followed it to try first.
Go to Domain Zone forwarder
Set DNS server on Lan interface
5 -
Dear Charlie,
THANK-YOU VERY MUCH. It works very well.0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 79 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 909 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 898 Nebula FAQ
- 415 Security FAQ
- 234 Switch FAQ
- 205 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight