Switch XGS4600 Series - V4.60 Patch 0 Firmware Release

Zyxel_Adam

Zyxel Switch XGS4600 Series
Release Note
December, 2020

Firmware Version on all models

(Click Hyper link to download the firmware directly)

Zyxel XGS4600-32　　　　- V4.60(ABBH.0)

Zyxel XGS4600-32F　　　  - V4.60(ABBI.0)

Zyxel XGS4600-52F　　　  - V4.60(ABIK.0)

New Feature and Enhancements

CLD=Cloud mode, STK=Stacking mode, STD=Standalone mode

No.	New Feature and Enhancements	CLD	STK	STD
1.	Auto configuration			V
2.	Advance Routing license			V
3.	WOL Relay			V
4.	Microsoft NLB (Network load balance)			V
5.	Port-list for clear interface			V
6.	Enhances copy-paste config via CLI/telnet/SSH to guarantee configuration data within the 300K byte will be process correctly with organized screen display			V
7.	Supports trunk ports for interface features			V
8.	Show/backup configuration			V
9.	Port-list for LLDP-MED network policy WEB			V
10.	Show MAC address table by trunk			V
11.	VLAN status enhance on WEB			V
12.	Auto speed selection on fiber port			V
13.	Import HTTPS certificate			V
14.	IPv6 route table on WEB			V
15.	IPSG with any MAC			V
16.	1024 entries per domain for DHCP server pool			V
17.	Display with “begin | include” filter on CLI			V
18.	Show serial number/hardware version/registered MAC address on GUI/CLI/MIB			V
19.	Auto refresh port status (CLI only)			V
20.	RIPng (Advance Routing license required)			V
21.	OSPF default information originate			V
22.	OSPF V3 (Advance Routing license required)			V
23.	Mirror destined to CPU packets			V
24.	IGMP snooping leave proxy			V
25.	802.1X EAPoL flooding			V
26.	DHCP relay mac proxy			V
27.	Port Speed duplex “auto-1000, 1000-full” change to “auto-1G, 1G-full”			V
28.	"snmp-server location" string size extend to 128			V
29.	port "auto" speed configuration			V
30.	L2 table collision log			V
31.	Time sync default enable			V
32.	Enhance location and port name to support special character [,]			V
33.	Locator LED steady blue while upgrading firmware			V
34.	Mac authentication options for MAC-address format			V
35.	WEB authentication to solve browser cache issue. In case of browser session timeout, press the cancel button should also prevent user from using the browser continuously.			V

Bug fix

No.	Bug fix	CLD	STK	STD
1.	[eITS#181100268] Changing VRRP status will cause end-devices cannot access through internet.			V
2.	[eITS#181001008] Restoring configuration will stuck in the restore configuration page.			V
3.	[eITS# 180800850] When IGMPv3 report has two or more group, only the first IP will be forwarded.			V
4.	[eITS# 180400283] PHY temperature displays abnormal value.			V
5.	[eITS#180100613] WebGUI will show error message even the configuration restored successfully.			V
6.	[eITS#171200661] Switch hanged after “show dhcp relay” three time via CLI.			V
7.	[eITS#180500584] DHCP relay feature still working even if the global function was disabled.			V

Please refer to the Download Link for more details.