IDP ADP signature update issue recovery SOP_final
Options
hansjalbertsson
Posts: 34
Freshman Member
Freshman Member
The document in the subject line is confusing in many ways:
The ip-address to connect to in the described procedure varies randomly.
There's a link to download the latest idp license signature, a link that appears dead.
What gives?
The ip-address to connect to in the described procedure varies randomly.
There's a link to download the latest idp license signature, a link that appears dead.
What gives?
0
Comments
-
Which document you referenced? Do you have the link?
"There's a link to download the latest idp license signature, a link that appears dead" You mean the link in the device GUI to let you update your signature or?0 -
Hello hansjalbertsson,
The issue should be solved on latest firmware, so you dont need to do any configuration from this SOP. I would like to know what issue do you face after you upload the latest firmware?
Charlie
0 -
The pdf document refers to this link
https://zfs01.zyxel.com.tw/bds/Login.do?id=A03781310&p1=z9j13wjsbeijcecblhdgjh20
where you're supposed to find the latest idp signature but that link is dead.
Now the document in that pdf is a bit confusing, and seems to have been cut&pasted fromseveral different sessions,w/o adjusting the example ip-s and checking if links were temporary or permanent.
So, I believe there's either a newer link, or the gui after fw-update to the latest dec-2016 version will handle a signature update.0 -
This begs the question: what IS the latest fw.Zyxel_Charlie said:Hello hansjalbertsson,
The issue should be solved on latest firmware, so you dont need to do any configuration from this SOP. I would like to know what issue do you face after you upload the latest firmware?
Charlie0 -
The latest firmware which Mark shared on another thread. Firmware Version:330AQW7ITS-WK48hansjalbertsson said:
This begs the question: what IS the latest fw.Zyxel_Charlie said:Hello hansjalbertsson,
The issue should be solved on latest firmware, so you dont need to do any configuration from this SOP. I would like to know what issue do you face after you upload the latest firmware?
Charlie
Charlie0 -
Thank you, we have that loaded on both usg-s now0
Categories
- All Categories
- 440 Beta Program
- 2.9K Nebula
- 208 Nebula Ideas
- 127 Nebula Status and Incidents
- 6.4K Security
- 528 USG FLEX H Series
- 331 Security Ideas
- 1.7K Switch
- 84 Switch Ideas
- 1.3K Wireless
- 50 Wireless Ideas
- 6.9K Consumer Product
- 292 Service & License
- 462 News and Release
- 90 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.6K FAQ
- 34 Documents
- 86 About Community
- 99 Security Highlight
Master Member
Zyxel Employee