Does Switch models XGS4600-32F and GS2210-24HP support IGMP query solicitation?

Caio
Caio Posts: 5
First Comment
edited August 2022 in Switch

Hello,

I would like to know if the Switches XGS4600-32F and GS2210-24HP support the IGMP query solicitation feature?

Thanks in advance.

Best Regards, Caio.

All Replies

  • Zyxel小編 Lucious
    Zyxel小編 Lucious Posts: 278  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment

    Hi @Caio


    Currently they don't support IGMP query solicitation.

    We just put the feature to "Ideas" and will have internal evaluation for the enhancement.

    Your opinion is appreciated.


    Zyxel_Lucious

  • Caio
    Caio Posts: 5
    First Comment

    Thank you for the information and attention.


    Best regards,

    Caio.

  • Caio
    Caio Posts: 5
    First Comment

    Lucious,

    If you allow me, I have one more question regarding this matter. Does these Switches have any feature that can replace the IGMP query solicitation?


    Thanks in advance.

    Caio.

  • Zyxel小編 Lucious
    Zyxel小編 Lucious Posts: 278  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    edited November 2019

    Hi @Caio

    We do have a workaround for you, please refer to the example of ring topology as below

    • Enable STP and IGMP snooping on every switch, and make sure that switch 1 as the root bridge and IGMP Querier.
    • Set Unknown Multicast Frame as "Drop" on every switch.
    • Change the IGMP Quierier Mode to "Fixed" for every port between switches.

    The fixed mode can ensure the demanding stream won't be interrupted in case of a topology change.


    Zyxel_Lucious