Subnet conflict..?

Options
Gayanll
Gayanll Posts: 14  Freshman Member
First Anniversary Friend Collector First Comment
edited April 2021 in Security
I recently connected a 3G modem to my USG 20-VPN. Now i keep getting this warning.

what should i do? I feel like my network just got a bit slow too.

thanks

Accepted Solution

All Replies

  • jasailafan
    jasailafan Posts: 193  Master Member
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    What are the IP address of the cellular interface and lan1/lan2/dmz/guest interfaces?
  • Gayanll
    Gayanll Posts: 14  Freshman Member
    First Anniversary Friend Collector First Comment
    Options
    What are the IP address of the cellular interface and lan1/lan2/dmz/guest interfaces?
    Cellular interface having public IP by ISP 10.65.xx.Xx

    lan1 is 192.168.1.Xxx
    there is no Lan2,dmz,guest
  • PeterUK
    PeterUK Posts: 2,969  Guru Member
    Community MVP First Anniversary 10 Comments Friend Collector
    edited June 2020
    Options
    So you need to change lan1 IP to not conflict with cellular.
  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,376  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options

    Hi @Gayanll  

    Some of dongles have default IP address with 192.168.1.X.

    It has conflicted to default LAN1 IP address.

    Please try to change LAN1 IP address to other subnet and check if it has improved this situation.

    Share yours now! https://bit.ly/4aO0BMF

    Stanley

  • Gayanll
    Gayanll Posts: 14  Freshman Member
    First Anniversary Friend Collector First Comment
    Options

    Hi @Gayanll  

    Some of dongles have default IP address with 192.168.1.X.

    It has conflicted to default LAN1 IP address.

    Please try to change LAN1 IP address to other subnet and check if it has improved this situation.

    Okey i will do like that.

    just curious can i change the dongle’s IP instead?
  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,376  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    You can try to plug-in the dongle to your PC and check if there is Web interface for change IP address.
    But it may not support for all of dongles.

    Share yours now! https://bit.ly/4aO0BMF

    Stanley

  • Gayanll
    Gayanll Posts: 14  Freshman Member
    First Anniversary Friend Collector First Comment
    Options
    So i changed my LAN1 IP address range.
    now its 192.168.2.XX as shown;


    But i still gets the same error 
    "Subnet Conflict!! Please do not use 192.168.1.X. Cellular1 has been inserted Huawei unknown"
  • Gayanll
    Gayanll Posts: 14  Freshman Member
    First Anniversary Friend Collector First Comment
    Options
    Thanks

Security Highlight