Skip to content
  • Register

    • VPN100 - Edit Ethernet window won't load for LAN interface after upgrading to 4.60(ABFV.0)

    2»

    Comments

    • Posts: 10  Freshman Member
      First Comment Friend Collector
      Zyxel_Charlie said:
      @xbolshe
      I tested it locally without any issue
      FW:v4.60
      Wan

      Lan

      Does this issue occur on previous firmware version? 
      Also, can you private message configuration for check purpose?

      No. It does not.

      I see the following problem:
      After sending commands from 0 to 24 as shown on a picture below, a response like zyshdata + i was returned only for 0 to 16 commands. There is no response for commands 17 - 24. The first command of this list is
      show matching mac oui LAN1_POOL,Static_.....


    • Posts: 10  Freshman Member
      First Comment Friend Collector
      I have deleted manually (via command line) static DHCP records for LAN1 interface. And now it works - see a picture below. So, the bug is related with static DHCP records.

      Router# configure terminal
      Router(config)# interface lan1
      Router(config-if-lan1)# no ip dhcp-pool Static_LAN1_xxxxxxxxxxxx
      Router(config-if-lan1)# no ip dhcp-pool Static_LAN1_yyyyyyyyyyyy
      Router(config-if-lan1)# no ip dhcp-pool Static_LAN1_zzzzzzzzzzzz
      Router(config-if-lan1)# no ip dhcp-pool Static_LAN1_cccccccccccc
      Router(config-if-lan1)# no ip dhcp-pool Static_LAN1_nnnnnnnnnnn


    • Posts: 10  Freshman Member
      First Comment Friend Collector
      edited November 2020
      May you add several static DHCP records to LAN1 and check how GUI works on 4.60?


    • Posts: 10  Freshman Member
      First Comment Friend Collector
      One more interesting point: VPN50 does not support a comma separated list in a command like shown below. It may be a problem.

      Router# show matching mac oui LAN1_POOL,Static_LAN1_xxxxxxxxxxxx
      % (after 'oui'): Parse error
      retval = -1
      ERROR: Parse error/command not found!
      Router# show matching mac oui LAN1_POOL
      No.  MAC OUI member
      ===============================================================================
      1    33:33:33
      Router#
    • Posts: 25  Freshman Member
      First Comment Friend Collector Third Anniversary
      I am experiencing the same issue after upgrading.
      It does seem to be related to static DHCP reservations as stated previously by 'xbolshe'
    • Posts: 1,034  Zyxel Employee
      50 Answers 500 Comments Friend Collector Fourth Anniversary
      @xbolshe , @bbp , @Tom2456 , @Bula64 , @RafaelDalben , @noelchiocchetti , @gb5102
      Regarding to this issue, the solution has been released.
      You can download from this Link.

    • Posts: 11  Freshman Member
      First Comment Third Anniversary
      THX A MILLION !!! It's working now !!
      V4.60(ABFV.0)ITS-2020-11-23-201100284
      		 working just fine !! 
    • Posts: 10  Freshman Member
      First Comment Friend Collector
      @Zyxel_Charlie  I confirm that the problem disappeared on VPN50 V4.60(ABHL.0)ITS-2020-11-22-201100284 / 2020-11-22 15:52:44. Thanks a lot!

    • Posts: 2  Freshman Member
      First Comment Friend Collector
      @Zyxel_Charlie I confirm as well that problem disappeared on VPN100 VV4.60(ABFV.0)ITS-2020-11-23-201100284 / 2020-11-23 09:0. Thanks a lot for your swift support!

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    Quick Links

    Categories

    Security Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）