GS1200 switch between modem and router?

Options
jdeve
jdeve Posts: 3  Freshman Member
edited August 2022 in Switch
Can someone advise me or direct me to the proper setup for putting my GS1200 switch between my router and modem?  I want to do it this way so I can port mirror all of my network traffic.    When I set up my VLAN for the switch I can no longer access the switch.  Not sure what I am doing wrong.  thanks!!!

#Home_Switch_Mar_2019

All Replies

  • Penny
    Penny Posts: 65  Ally Member
    Options
    What is the firmware version of your switch?
    Is possible to share your network topology, screenshot of VLAN setting and where is the connection of your control device? 
  • jdeve
    jdeve Posts: 3  Freshman Member
    Options
    V1.00(ABME.4)C0.  

    What I want to do.....
    Metronet fiber PON > GS1200-8 > Linksys EA8300
     


  • Penny
    Penny Posts: 65  Ally Member
    Options
    I checked GS1200-8's release note, only VLAN 1 can manage/access switch's web interface.
    Please make sure your VLAN setting.

  • jdeve
    jdeve Posts: 3  Freshman Member
    edited March 2019
    Options
    Well that is helpful I think.  Seems to be working now although I don't really understand how it can be working.  

    So what I now have is...

    VLAN  1-  Port 4 untag (green),  other ports disabled (grey)
    VLAN 2 - Port 4 disabled (grey), other ports untagged (green)

    PVID setup is  2 2 2 1 2 2  2  Port 4 is VLAN 1 others VLAN 2.

    Port 2 is mirrored both directions, Port 3 is my monitor port (will be used for a raspberry pi IDS).

    My fiber modem (called a PON) is plugged in to switch port 1.  My Linksys router is plugged into switch port 2.  My switch port 4 is plugged into router.

    So I don't really understand how my router can route with a switch before it.

    I am interested in additional thoughts or comments.

    thanks!!!!

      

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）