USG FLEX 100W WLAM DHCP

Lost1 · January 2021

I cannot find where to setup the DHCP for the WLAN.

Ethernet was fine but where are the DHCP Setting for the wireless?

I know I've missed it somewhere!!

Thanks!

Lost1 · January 2021

I see under wireless the only settings are Outgoing Interface which have choices of LAN1, LAN2 & DMZ.....am I missing on option so it will not be part of those interfaces?

PeterUK · January 2021

The DHCP setting are in interface like LAN1 when you setup the SSID for no untag VLAN ID 1 you set VLAN support to off and outgoing interface LAN1, if setting up a VLAN on base port LAN1 for the SSID you set VLAN support to on.

Zyxel_Jeff · February 2021

Hi @Lost1

You can choose Outgoing Interface (e.q. lan2) of WLAN.

Image: https://us.v-cdn.net/6029482/uploads/editor/86/osm8aocylnqw.png

And navigate Configuration > Network > Interface > Ethernet > Edit interface(e.q. lan2) DHCP IP range.

Image: https://us.v-cdn.net/6029482/uploads/editor/nl/t5asx1g3s84z.png

Lost1 · February 2021

Thanks! Yes that's my issue/question...I want to use Lan1 & Lan2 for different things other than Wlan. It's like you only get two different networks when you use Wlan wereas my old zyxel had Lan1, Lan2, Wlan, & DMZ all with their own subnets.

I just hate giving up Lan2 or Lan1

PeterUK · February 2021

Make a new zone and a VLAN with that zone for the WLAN.

USG FLEX 100W WLAM DHCP

All Replies

Categories

Security Highlight

Security Help Center