2 vlan on xgs1930 + internet without USG

sanio
sanio Posts: 1
Hello
I have an internet box (without vlan management) + 1 Switch xgs1930-52. I have configured 2 vlan (vlan 1 and vlan 2) on my xgs1930-52.
The PCs in the 2 vlan must not be able to see each other but they must be able to go on the Internet.
All this without USG (router / firewall)
How should I do ?
thank you in advance

All Replies

  • Nebula_Melen
    Nebula_Melen Posts: 21  Zyxel Employee
    Hi @sanio,

    Welcome to Zyxel community.

    Because your internet box without vlan management, if you use VLAN function that will make your PC which is not in the same VLAN as the internet box would not link to the internet.
    We recommend you to use port isolation to archive you propose.
    Example is shown below.

    Note:

    All VLAN port setting are used as examples in this article. Please replace them with your actual network setting.

    1.Go to Menu > Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup to check port isolation you what they could not be able to see each other. Here we check port 1&2. This means port 1&2 will be isolated. They can not communicate each other but they can communicate other port which is no been isolated.


    Hope it helps.


    Melen
Sign In to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click on this button!

Community News