Enter Devices behind Firewall
Options
Comments
-
This will not work unless you can do static route on router 192.168.0.1
The reason for this is USG-20W on WAN gets a IP 192.168.0.1/24 and let say 192.168.0.50 want to connect to 192.168.1.60 the router at 192.168.0.1 will not know to forward 192.168.1.60 to USG-20W which is where static route is needed but this must be done on the 192.168.0.1 router.
0 -
You need to add a static route on the device (192.168.0.1) just like PeterUK suggested.destination IP: 192.168.1.0subnet mask: 255.255.255.0gateway IP: 192.168.0.x (the wan IP of Zywall USG-20W)0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 52 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 221 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 63 Security Highlight