Establishing VLANs

Hi, I’ve recently purchased a GS1200-5.

I have an IoT device which I want to only have access to the internet, not the rest of my LAN.

my current set up:
- wireless router (built-in modem).
majority of devices connect with wifi, however my NAS is Ethernet enabled.
- Zyxel switch, Ethernet from router to port 1.

I tried setting up a new vlan for port 5 and connecting this IoT device to port 5. However it appears it can’t talk to the router, doesn’t even register with the DHCP service.

I am sure that this is only due to my lack of understanding on how to configure the switch.

TYIA!!

All Replies

  • mMontana
    mMontana Posts: 1,298  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer
    edited September 2022
    The wireless router is vLAN capable? If not... you have a nice switch but no way to use it (more or less) for vLAN
  • PeterUK
    PeterUK Posts: 2,656  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer
    edited September 2022

    Even if you had a port based VLAN option the IoT can access your routers Wifi devices so you need a better router.


  • Thanks both, I was worrying this may be the case. Any suggestions as to what to look for in a router?
  • PeterUK
    PeterUK Posts: 2,656  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer

    Depends how fast you want to go plus Wifi there is the ATP100W that might do 400Mb TCP or you can get VPN300 that I know can do 1Gb TCP without wifi. You can get simple AP or more advanced AP for SSID to subnet/VLAN


  • Zyxel_Chris
    Zyxel_Chris Posts: 653  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    @Encrypto,
    Could you screenshot the VLAN setting for me. 

    thanks.
    Chris