GS1910-24 VLAN

Onur
Onur Posts: 6
First Comment
edited February 19 in Switch
I have completed the configuration as vlan3 and vlan4 on sophos firewall. Although I pull to vlan3 or vlan4 on gs1910-24, devices connected to port1-2 cannot get IP.
What else do I need to do? thanks

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 1,104
    Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate 100 Answers
     Zyxel Employee
    edited February 21
    Hi @Onur,

    The port VLAN configuration of Sophos firewall connecting port is recommended as below:
    1. Port VLAN should be "1" if your management VLAN is 1.
    2.  Egress tagging should be "Untag port VLAN".
    3. Allowed VLAN should be "1,4"

    Also, the port VLAN configuration of end devices connecting ports are recommended as below:
    1. Port VLAN should be "4".
    2. Egress tagging should be "Untag port VLAN".
    3. Allowed VLAN should be "4"

    Hope it helps.

    Melen
  • Onur
    Onur Posts: 6
    First Comment

    The cable from the firewall is plugged into port 24. The computer with Windows is plugged into port 2. Management port is in vlan1.but windows computer is not getting IP

    vlan3.JPG

  • Onur
    Onur Posts: 6
    First Comment

    problem is solved. The problem was caused by the dhcp distribution being turned on.

Categories

Switch Help Center

  • FAQ
  • New & Release
  • Video Tutorials
    • EnglishTiếng ViệtРусскийไทย中文（台灣）