USG LITE60AX V2.30(ACIP.0)C0 Firmware release

Options
Zyxel_Jerry
Zyxel_Jerry Posts: 1,405 image  Zyxel Employee
Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments
edited February 2 in Security Gateway New Release

USG LITE 60AX (Release date: Jan, 2026)

USG LITE60AX

Release Note

V2.30(ACIP.0)C0

Download

Comments

  • Lohkamp
    Lohkamp Posts: 30 image  Freshman Member
    First Comment Friend Collector First Anniversary

    I have issues reaching exactly one server from exactly one client PC.
    The client is connected to our XMG1915-10EP, the server on LAN1 or LAN3 (tested) of the USG LITE 60AX. I cannot ping or RDP or use any other TCP/IP connection to the server from the client PC (but vice versa!). But if I connect the server to the switch it is working. I never had such problems, and they started directly after the firmware update. Even changing the IP reservation of the client, reboote or full power cycles of all devices did not help.
    RDP to the server from WLAN or other LAN devices is working!
    Will create support ticket directly via NCC and stop all firmware update for our customers till this issue is analysed and fixed.

  • Tricatel
    Tricatel Posts: 2 image  Freshman Member
    First Comment Eighth Anniversary

    I also have this problem. After upgrading USG LITE 60AX to version V2.30(ACIP.0) communication between LAN ports does not work.

  • Lohkamp
    Lohkamp Posts: 30 image  Freshman Member
    First Comment Friend Collector First Anniversary

    Issues gone after downgrading to 2.20(ACIP.0) with Zyxel support. Will wait for and test with the next version.

  • MrAllegheny
    MrAllegheny Posts: 2 image  Freshman Member
    First Comment Friend Collector
    https://community.zyxel.com/en/discussion/comment/83028#Comment_83028

    how you have done that?

  • Mk88_it
    Mk88_it Posts: 76 image  Ally Member
    First Comment Friend Collector Third Anniversary

    @Zyxel_Jerry We're having the same issue — please help! It seems that L2 client isolation has been enabled for some reason!

  • Lohkamp
    Lohkamp Posts: 30 image  Freshman Member
    First Comment Friend Collector First Anniversary
    https://community.zyxel.com/en/discussion/comment/83181#Comment_83181

    This can only be done by Zyxel for this model. Open a support ticket using the "(?)" in NCC and scroll down. But I heard there may be a new version this week hopefully. So, if you can wait a few more days I recommend it.

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,405 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments

    Hi @Mk88_it @Lohkamp @MrAllegheny @Tricatel

    The new firmware has been released which fixed the issue.
    You can click upgrade directly on the firmware management page to upgrade to the latest firmware.

    image.png


    https://community.zyxel.com/en/discussion/32154/usg-lite60ax-v2-30-acip-1-c0-firmware-release#latest

  • Lohkamp
    Lohkamp Posts: 30 image  Freshman Member
    First Comment Friend Collector First Anniversary

    Just installed, first impression: described bug above in V2.30(ACIP.0) gone with V2.30(ACIP.1). Thank you.

  • GiuseppeR
    GiuseppeR Posts: 621 image  Master Member
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Nebula First Comment Friend Collector

    I installed V2.30(ACIP.1) too and I have NO issues like that via LAN ports, so I think the bug is solved.

Categories

EnglishTiếng ViệtРусскийไทย中文（台灣）