XGS3700 number of LACP links in stacking mode

DS_net
DS_net Posts: 10
First Anniversary First Comment
edited August 2022 in Switch

Hi,

we stacked two XGS3700-48 for redundancy reasons.

We want to connect other switches and server via LACP which works so far. (Switches must run the same firmware version)

It seems that the number of LACP links is limited to 24 which makes sense for one 48 port switch but is pretty limiting for the stacked 2x 48 where we want to use about 30 LACP links with two gigabit each.

Is it possible to assign more LACP groups?

All Replies

  • Zyxel_Derrick
    Zyxel_Derrick Posts: 126  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment

    Hi @DS_net


    Welcome to Zyxel community

    The max number of LACP link is fixed 24 for XGS3700

    After stacking, it still takes whole stack as a device and the max number of LACP is still 24

    It will not increase after stacking

    Thanks


    Best regards,

    Zyxel_Derrick

  • DS_net
    DS_net Posts: 10
    First Anniversary First Comment

    We noticed that it is still 24 after stacking. (Is there a table where customers/reserllers can find those numbers? )

    Is it possible to change that while stacked by creating a new firmware?

  • Zyxel小編 Lucious
    Zyxel小編 Lucious Posts: 278  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment

    Hi @DS_net


    May we know the scenario/application of your environment?

    Just kind of wonder the purpose of such huge number of LACP links.

    Feel free to PM us if there is certain privacy concern.


    Zyxel_Lucious

  • DS_net
    DS_net Posts: 10
    First Anniversary First Comment
    edited June 2019

    Hey Zyxels,

    the setup is "pretty simple".

    Two redundant firewalls each with 2x 10GE LACP into two XGS3700-48 which are stacked so the LACPs are splitted to prevent SPOF.

    From the two stacked XGS3700-48 about 22 GS1920-48 are connected via 2x 1GbE LACP, and we want to add several servers and switches also via LACP.

    At the moment we can't add more LACP links because of the preset of 24 LACP links.

    Regards

  • Zyxel_Derrick
    Zyxel_Derrick Posts: 126  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    edited June 2019

    Hi @DS_net


    Thanks for the information

    So far, XGS3700 can only support to 24 LACP links after enabling stacking

    We will put the requirement to "Idea" and evaluate the possibility of enhancement

    Thanks


    Zyxel_Derrick

  • DS_net
    DS_net Posts: 10
    First Anniversary First Comment

    Hello,

    any updates on this?


    Regards

  • Zyxel_Amy
    Zyxel_Amy Posts: 5  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment

    Hello @DS_net ,

    I will PM you to follow up on the details

    Regards,

    Amy

    Zyxel Switch PLM