-
How to perform wireless environment scan via CLI on AP to know channel condition?
SSH into the AP and Login Run the command to call AP to scan and print result Router>_debug wireless_dbg scan_agent_cli scan 2G 50 Router>_debug wireless_dbg scan_agent_cli scan 5G 50 Router>_debug wireless_dbg scan_agent_cli scan 6G 50 (wait 3-5 mins) Router> _debug wireless_dbg scan_agent_cli print_scanresult The result…
-
How Should I Align Root and Repeater APs for an Outdoor Mesh Deployment?
Recommended Actions: Use a smartphone application, such as Google Maps or a compass app, to identify the approximate direction between the Root AP and Repeater AP. Position the APs according to their antenna coverage patterns, ideally facing each other when using directional antennas. Ensure clear line of sight and…
-
How to Determine Mesh Connection Quality from the NWA55AX PTP LED Indicator?
During Mesh deployment, the AP's LED indicator provides a quick way to identify the wireless backhaul signal quality between the Root AP and Repeater AP. Depending on the AP's operating mode, the LED may display green or amber, with different blinking patterns indicating the signal quality. Default unbox AP or Nebula…
-
NWA55AX PTP Wireless Bridge Deployment – Mesh Troubleshooting (Standalone Mode)
This guide provides a step-by-step troubleshooting procedure for mesh deployment issues, including cases where a Repeater AP cannot establish a Mesh connection with the Root AP or experiences intermittent disconnections after connecting. The troubleshooting process focuses on three main areas: Issue1: WDS link cannot setup…
-
What is the recommended wireless deployment distance for FWA7 Root Plus/Root/Leaf Plus?
For the FWA7 Root Plus, the recommended wireless deployment distance is within 5 km, and we do not recommend exceeding 10 km to maintain reliable wireless performance. The actual wireless distance and performance may vary depending on the deployment environment. For optimal performance, we recommend the following…
-
[USG FLEX H] How to Configure Secure Wi-Fi for Remote AP scenario on Controller-Managed APs?
In a Secure Wi-Fi, AP acts as a VPN Client and establish the IPsec tunnel to Gateway then the traffic of tunnel mode SSID can be protected by IPsec VPN. This approach provides data encryption for teleworker’s traffic (NVGRE over IPsec VPN) without any settings on user end device. The example instructs how to set up Secure…
-
What are the Best Wi-Fi Practices for HomePod?
For the best HomePod and AirPlay experience, we recommend the following network settings and practices: Keep the HomePod and the controlling iPhone, iPad, or Mac on the same VLAN/subnet whenever possible. If they are on different VLANs, make sure mDNS/Bonjour forwarding is properly configured. Disable Client Isolation /…
-
Troubleshooting Wireless Performance Degradation due to Multicast Storms
Beginning with sustained multicast ingress, Zyxel access points default with Multicast-to-Unicast (M2U) enabled on SSIDs. In wireless networking, M2U is an optimization feature used by Zyxel Access Points, allowing them to transmit at maximum rate instead of a slow, fixed fallback speed. When M2U is active, the AP…
-
How to Perform an Intranet Speed Test Using OpenSpeedTest
Why should I perform an intranet speed test? An Internet speed test measures the complete path from your client device to an external test server. The result may be affected by several factors outside your local network, including: ISP network conditions Internet routing and congestion The location and load of the external…
-
Why Does WiFi Performance Decrease with Multiple APs?
When multiple APs operate in the same environment, WiFi performance may decrease due to co-channel interference, channel congestion, or environmental obstacles. A common cause is when nearby APs operate on the same channel. In this case, the APs must share airtime and bandwidth, which can reduce throughput and impact…
-
How to Improve Roaming on Laptops with Zyxel APs
If you are experiencing roaming issues where laptops stay connected to distant Access Points (APs) instead of switching to nearer ones, here are some steps to troubleshoot and improve the situation: Recommended Configuration Changes: * Disable "Avoid 5G DFS channel" in your Zyxel AP settings. * Enable "Blacklist DFS…
-
How to check poor coverage in the 5GHz and 6GHz bands?
Higher frequency radio waves, like those used in the 5GHz and 6GHz bands, have shorter wavelengths. Shorter wavelengths have a harder time penetrating solid objects such as walls, floors, and furniture. This results in reduced coverage and signal strength as you move away from the wireless access point. To effectively…
-
How to enhance VR experience through Wi-Fi Optimization?
1. Establish a Separate SSID with an Isolated VLAN Subnet for VR Devices: By setting up a dedicated SSID on a separate subnet, you can effectively isolate VR device traffic, mitigating any potential performance issues caused by broadcast or multicast storms. 2. Fine-Tune WLAN Rate Control: Enhance the WLAN rate control…
-
Solve Wi-Fi disconnection or intermittent connectivity
Wi-Fi disconnections or intermittent connectivity can significantly impact productivity and lead to frustration. This article aims to guide you how to resolve these issues, particularly focusing on standalone APs, to ensure a stable and reliable wireless network connection. Update Client Drivers Issue: Outdated drivers on…
-
How to enhance Wi-Fi Signal Strength when Deploying APs?
The placement and environment of your Zyxel device significantly affect the Wi-Fi signal strength. 1. Central Location: Place your Zyxel device in a central area of your space for uniform coverage. Avoid corners or distant rooms. 2. Avoid Obstructions: Keep the device away from physical obstructions like walls, large…
-
Do my devices need to have Mesh function for roaming?
Roaming is the behavior of end device to move between different access points within the same network without losing connection. This can happen in traditional networks as well as in Mesh networks. Therefore, your devices that don't support Mesh function can still deliver roaming environment for end devices. The key…
-
The Difference Between Roaming and Mesh in Wireless Networks
Explanation: Roaming and Mesh are two key concepts in wireless networking, often mentioned in the context of enhancing connectivity and coverage. While they are sometimes confused or used interchangeably, they serve distinct purposes. Mesh network: It is a network that involves multiple APs working together to create a…
-
What is the ideal position for AP deployment?
APs are optimized for a horizontal position; it means APs are fixed on the ceiling. Please place the AP outside the ceiling. If needs to put AP inside the ceiling, make sure the front of APs is facing to the service area (usually down). Remember to avoid the metal material for interference such as cable tray, ventilation…
-
Can I position APs in direct line of sight?
We would recommend avoiding positioning Access Points (APs) in direct line of sight of each other, as this can cause interference and reduce the overall performance of your wireless network. In case, it may be necessary to position APs in direct line of sight of each other, we recommend: Adjusting the transmit power of…
-
Guideline for Setup and Proceed Throughput Test
Background “Throughput” is an indicator to evaluate the performance of a network and devices within, and is widely used to compare the capability between different brand products (either access point or client devices). However, the value can be easily interfered by lots of factors, and cause users not to look at results…