Step 1 Establish a Telnet connection to the SBG3300. The default IP address is 192.168.1.1. Use the “admin” account to access the SBG that can do the packet capture. Step 2 Enter the command "sh". Step 3 Enter command “tcpdump -i ‘interface name’ -w /var/tmp/’file name’”. In this example, the goal is to capture packets in…
Router> configure terminal Router(config)# set firmware boot number 1|2 After boot up partition number is set, device will reboot immediately by selection partition.
How to check the issue during apply the configuration file? If a user cannot apply a configuration file and the device shows an error log, choose "Immediately stop applying the configure file" first before trying to apply the configuration file. VERIFICATION: Go to Monitor > Log > Display category, choose "File Manager";…
How can I be sure that the CPU high usage is due to heavy traffic loading? Use the command line "debug system show cpu status" to see the CPU usage details. Refer to the screenshot below wherein "softirq" means that the CPU is occupied with traffic load. On the other hand if the CPU is occupied with a system item, users…
Configurations on the USG Configurations on Gmail account Turn on "Allow less secure apps" on the Gmail account.
SCENARIO DESCRIPTION:I have forgotten my device login password, so I tried many times to log in to device. But the device shows the password is wrong, and locked my address. And after 5 minutes, I have found my password again. But my address is still locked, how can I resolve this issue? SETUP/STEP BY STEP PROCEDURE:You…
How to Set Up Guest WiFi Network Accounts This is an example of using ZyWALL/USG to configure guest WiFi accounts to allow limited wireless access to the Internet using only HTTP, HTTPS, and DNS protocols. For the wireless network setup, please see the tutorial about How to Set Up WiFi with ZyXEL AP. SETUP/STEP BY STEP…
It looks like you're new here. Sign in or register to get started.