-
VES1724-58V configuration
Hi all, i have a VES1724-58V on a solar PV plant. The main purpose is to act as an unmanaged switch to connect the equipments in the fiels(dataloggers) to our LAN in the Office. I have the required number of Vdsl modem/routers and tey does not need to have a specific ip. Also DHCP is disabled. How can i configure the Dslam…
-
(Solved) EX3510-B1 Port Forwarding Issue
I'm not sure if i'm doing this right and the manual doesn't seem to be helpful. I'm trying to port forward to a few ports to host a game server and it doesn't seem to work just entering the ports into the port forwarding section alone doesn't seem to be working at all. Maybe I missed a step?
-
VMG3925-B10C Firmware Upgrade
My Zyxel VMG3925-B10C is locked with this firmware version 5.13(AAVF.10)X4 because it does not have the "Firmware Upgrade" option in the "Maintenance" tab and none of the possible methods is working on it to upgrade its firmware. I also tried the USB method, and the Command Prompt method but none worked for me. So is there…
-
Zyxel VMG3925-B10C Firmware Upgrade
I want to upgrade the firmware on my VMG3925-B10C router. The older firmware version is V5.13(AAVF.10)X4 and I want to upgrade it to V5.13(AAVF.18)C0. I followed the instructions however "Firmware Upgrade" option is available in the "Maintenance" menu, I have also attached the screenshot of that interface please help me in…
-
Zyxel VMG3925-B10C Firmware Upgrade
I want to upgrade the firmware on my VMG3925-B10C router. The older firmware version is V5.13(AAVF.10)X4 and I want to upgrade it to V5.13(AAVF.18)C0. I followed the instructions however "Firmware Upgrade" option is available in the "Maintenance" menu, I have also attached the screenshot of that interface please help me in…
-
USG40W for sale !!!
I am selling a device and I cannot remove it from my account and the new owner wants to register it again, please respond quickly. USG40W - MAC B8:EC:A3:A8:BD:A3 - Serial S172L13140685
-
Can't connect to v6 address through WiFi on NBG7510
Good evening all. This router is very good value and has been working well on minimally-changed default settings. However IPv6 connections do not seem to work at all. The "Primary DNSv6 Server" and "Primary IPv6" fields says N/A. I cannot ping google.com using "-6". Are there any steps I need to perform on my ISP router or…
-
VoIP config on EX3301-T0
How can I set up VoIP SIP accounts on a EX3301-T0? The manual only talks about checking the status via System Monitor>VoIP Status, and I cannot even find that. What to do?
-
Latest DX3301-T0 firmware missing SSH help
I recently bought a DX3301-T0 router which I was initially very happy with but recently I was experiencing frequent hangs* to both wired and wireless clients (though not at same time - either wired or wireless). On Monday I found that there was newer firmware 5.50(ABVY.4)C0 so thought it was worth upgrading to see if that…
-
Why my iPhone 12 is connecting only to the Guest setting?
I have recently configured a Zyxel VMG3925-B10C to my network and from one day to the other my iPhone won't connect to the Internet any longer but will connect to the guest settings? Please help! 🙏 Thanks in advance!
-
DHCP options and login info
Hi ! I'm trying to configure a ZYXEL PM7300 for WAN connection. It seems there is no possibility to setup a PPPoE encapsulation without credential (username / password) - is there a reason for this or a way to force it ? Also, DHCP options are only available when I select IPoE, not PPPoE (which is not the case on my other…
-
AMG1001-T10A
Hi all, as old dowloads left Zyxel FTP site, is there a way to get a secured firmware for AMG1001-T10A correcting CVE-2014-9222 thanks for your help B.
-
Anyone using a ZyXEL VMG4005 ADSL modem?
I have rewired my house and installed a pair of ZyXEL GS1920-24 switches and need to replace an old Netgear ADSL modem. I just want a basic modem, no WiFi and with a 10/100/1000baseT port, to manage my existing broadband connection (FTTC). I found the ZyXEL VMG4005 and wondering if anyone has tried using it on a domestic…
-
voip DX3301 T0
DX 3301 T0 jak na tomto telefonu nastavit správné Dial Tone, Back Ring Tone a Busy Tone. Pokud zadám v nastavení Česká republika a Evropa telefon nefunguje korektně
-
The problem of not being able to access the router control page because the password is incorrect af
Hello, I am from Egypt. I have a router from the landline internet company WE, and my router is Zyxel VMG3625-T50B. I made the original firmware for the router from the Zyxel website and decrypted it from WE, but I cannot log in to the router’s control page. I tried the username and password that are in the paper at the…
-
Limiting Bandwidth
Hi there I wondered if theres a way on my router EX3301-T0 to limit the bandwidth to certain devices that are connected via wifi, and indeed to also prioritise a certain device to get the best of the bandwidth ?
-
firmware download for EX5401
where can find firmware downloads for EX5401 I have an issue with Voip using the latest firmware and need to roll back to an earlier version
-
Change mac address of wan interface for VMG4005-B50A
Dear all is there a way to change the mac address of an interface for zyxel products? I want to change the mac addres of wan for the VMG4005-B50A, there is no such feature in the web ui but if I export a backup file there is this part { "Stats":{ }, "Enable":true, "Alias":"", "LowerLayers":"PTM.Link.1",…
-
LTE3301-PLUS : ridiculously slow upload ?
Hey, so here the problem (same location, same SIM, same everything) 50$ class4 LTE3301-M209 : 5-7Mb download for 4Mb upload 200$ class6 LTE3301-PLUS : 7-15Mb download for 0,01 upload. Why ? Is my router defective ?
-
Help With Login Portal
Hi, I have a Zyxel Modem from T-Mobile (a Dutch company) and it's brand new, but it wont get me to the login portal. If I connect to http://192.168.0.1 it shows for a second and then redirects me to https://192.168.0.1 and refuses the connection. I tried a factory reset but no luck, SSH, TelNet, Disabling HTTPS Redirects,…
