-
Zyxel ax7501-b0 guest wifi problem
Hi, I have this Router Model from Yallo. It works almost all ok, but I'm struggling to use the home guest network on 2.4 GHz for some older devices (set on the "More AP/Guest" wireless option). For some integration I need to use it to add devices using my phone (Iphone 12 pro). but when using this phone model on the…
-
AMG1302-T11C - Username character set
My username contains the character "^" in it but my AMG1302-T11C does not accept my username with this. If I remove this character I am able to save my settings but not with the character in the username.
-
Expose IPv6 computer Zyxel7501-B0
I have a Zyxel6501-B0 modem/router and a static IPv6 subnet. How can I assign an IPv6 to devices in my lan and have their IPv6 exposed to the internet?
-
NBG7815 Port 80 and forwarding
I bought a NBG7815 router for the 10gb port yesterday. However I can't forward Port 80. I run my own server and cloud which needs that port. I was also displeased at having to set up an account to use a device I bought that generally does not need an account. What happens if Zyxel stop trading? Do I end up with a brick…
-
WPS connection
Hi. I have just had new Fibre Broadband installed and I'm having a problem connecting to the Zyxel router that was supplied with it.I have trien numerous time to connect through the WPS button on the rear but the printer just doesn't find it.Any help would be appreciated.Ian McAuley
-
EX3301-T0 Problem with adding websites to block.
Hi!I've a EX3301-T0 and i've been trying block some websites. But all i get is a timer on what day and time i can block that DEVICE. I want to block certain websites but don't seem to find the setting for it. I'm using V5.50(ABVY.3.1)C0 firmware
-
AX7501-B0 - Cannot connect to Disney Plus using Wifi - But can via another AP's WiFi
Hello, Recently got this AX7501-B0 router as we upgraded our Home internet to Hyperfibre2, 2000Mbps Up and Down. We have had Disney Plus for over a year, and it works fine to our TV and Mobiles (All Android), however after we got this new Router we cannot connect to Disney plus on ANY of the mobile phones anymore, when…
-
Zyxel Armor G5 - NBG7815
Hi, there are a lot of corrections to be made on this young model:
1. Translation, in my situation to italian (es. clear >> pulisci, and not chiaro: light) and other words
2. Cloud account doesn't recognize the mac adress and serial of router, manually too
3. The link aggregation function today is a must have
4. Is…
-
WAP3205v3 - LAN DHCP Server in AP mode?
I need a device to connect a small number of wired and wireless devices together in a music studio. This would be a disconnected, standalone network - ie no internet access, no other router or AP would be involved. So I would need the device providing the network to issue DHCP addresses to both the wired and wireless…
-
NBG6515 - unable to login after V1.00(AAXS.8)C0 firmware update
Firmware update from V1.00(AAXS.7)C0 to V1.00(AAXS.8)C0broke web management login.Password which is/was used to login is 23 chars long.Password is not overly complex, but contains;- upper- and lowercase, numeric and other chars, from ascii range 33 to 122.
-
can't reach my server from outside
Hello, i have a linux server running, with some containers, in my home connected with Ethernet. I have a Zyxel router with port 80 opened and a personal domain with duckdns. Inside my network I can reach my server with internal IP but with my domain i reach my router page. Instead from outside my network is unreachable.…
-
LTE5398-M904 finding sim but no internet connection
Hello, today I tried my LTE5398-M904 but I encountered a problem: After inserting the SIM, the router started up normally but only the led on power and wifi turned on. I managed to go to the default page to configure the router and it said that the SIM is in the slot, but there's no internet. I tried setting up manually…
-
Multiple subnets with same WAN on C3510XZ
First I need to clarify that my question has nothing to do with the NBG/ARMOR series but that’s the option that this forum selects for me when I select “home router”. I’d like to setup multiple subnets on my C3510XZ which I’m using with CenturyLink fiber. I’ve figured out how to change the LAN settings to assign an IP…
-
NBG7510 setting IP in Access Point mode
Hello all! I have the following problem: I would like to set manual IP to my NBG7510 router while I have it in Access Point mode. The AP mode works fine, internet is available to wireless and wired clients, the only problem I have is that when I want to change the IP of this router. If I go to LAN section, and I see the…
-
access XMG3927 in bridge mode
Hi, how can I access the XMG3927 when it is in bridge mode?
-
AX7501-BO
Hi I haven't had a chance to get human support through the website until now, I've been trying for weeks...That's why I see writing to you here as a last resort. Firstly, I need a password reset for my login for the box settings because I cannot log in there and secondly, I absolutely must have answered a question, Yallo…
-
Armor G1 / USB Zugriff einrichten
ich suche eine verständliche Anleitung in deutsch um meinen angeschlossenen USB Stick einzurichten als Speicher für meine Überwachungskamera.
-
NR5101 Issues with Cellular
So I have installed router and done external antenna with help of zexyl air app. Issue i have why i my phone is showing -96dbm and 4 bars most of time but when logging in on the 192.168.1.1it shows -115 and 2 bars. I am using external antenna.
-
Can't reset modem DX5401
Hi all, I lost the access to my modem DX5401 so I want to reset it but nothing happen using the reset key in the back. I tried to keep it 3 minutes but the modem still don't reset. Can someone please teach me the right steps to reset it? Thanks
-
Sbg3300 - how to setup a PPTP VPN server on this router?
I'm trying to setup a PPTP VPN server on this router but don't know how to grant a particular user right to connect via PPTP. My settings for PPTP server are here: The users settings are here: Windows PPTP VP client tries to connect to the VPN server, shows 'Verifying password...' and after 30secs of waiting breaks…