-
Switch from Three to EE on LTE3302
I've been using a Three data SIM in an LTE3302 router to get mobile broadband. I'm now trying to switch to EE, but the router just will not connect to the internet with the new EE SIM. Router and Three SIM were purchased separately, so the router is not locked to Three. I've tried a factory reset to no avail. I don't…
-
NR5101 new firmware release V1.00(ABVC.6)C0
https://www.dropbox.com/s/y9jssva1hqxvhzq/V1.00(ABVC.6)C0.bin?dl=0 https://support.zyxel.eu/hc/en-us/articles/4403365084818-5G-Devices-Advanced-Downloads-Firmwares-and-other-resources-
-
LTE5388-M804 cellular connection issue
Hello everybody, I have been using my new Zyxel LTE5388-M804 for several days and I have faced the following connection issue. Once per day it loses connection to the Internet. I believe it happens every 24hrs +/- 5 mins, looks like session expiration or something. When I check connection status in the router's web…
-
Router 5G NR5101-EUZNN1F SIM voice support RJ11 for external cordless
Hi to all, I need to know if this router model NR5101-EUZNN1F has the support for voice SIM , with the RJ11 port to connect an external cordless, like my actual LTE5398-M904. If it hasn't the voice support, which is the right model I need to buy ? Thanks
-
LTE7490-M904 Firmware
Hi, Unless mistaken, on latest firmware for LTE7490-M904: - no option to view SMS messages - no option to put device into router vs bridge mode, you have to use LAN to WAN - no stats on carrier aggregation and what bands are in use - no option to manually change APN without error accepting the details - no option to access…
-
NR7101, on ship, want to connect Omni-directional antenna
Hi Can someone please share what connections inside nr7101 is for the lte antenna ? I want to connect external antenna that works in every direction.
-
NR7101 set primary band
Hello, i have NR7101 and in my location the BTS have B7,B3,B1 and B20. I can use this 4 bands in carrier aggregation and the download speed is ~400Mbps. The carrier aggregation uses B1 by default for the primary band, my upload speed reach 25 Mbps maximum. But sometimes the router uses B3 for the primary band with the same…
-
NR7101 user account edit for those who don´t know....
Maintenance/user account and finally modify. Just to make it easier to do changes without logging in again after 5 minutes .....
-
NR5101 auto-boot after power outage?
servas, i could not find information if the NR5101 is capable of automatic boot after a power outage? i'm currently using a LTE4506 and this does not :( (( ciao H.
-
LTE3301-PLUS unusable USB Service
Serial number: S220Z17002405 Firmware version: V1.00(ABQU.4)C0 A USB memory share does not survive a reboot, the share is only mounted when it is attached to the router and not if it already is attached.
-
firmware update LTE3316 fails
I have an LTE3316, currently running V1.00(ABMP.2)C0. I'm trying to update to the recent firmware update V2.00(ABMP.4)C0 (the download from https://www.zyxel.com/support/DownloadLandingSR.shtml?c=gb&l=en&kbid=M-02861&md=LTE3316-M604#) , but when I try to upload either of the two .bin files inside the .zip package, I get:…
-
NR7101 randomly disconnect during the day
Hi All, The modem is good and connection during the day is stable enough for the area that I am leaving. Settings are the default with some exception such as the default IP (changed), band selection. I have the modem almost for a year now I have moved different ROM and firmaware, at moment 1.00(ABUV.6)C0 and…
-
Mesh system
Hey, my mother and father will be getting a https://service-provider.zyxel.com/global/en/products/5g-nr4g-lte-cpe/5g-nr-cpe/idus/nr5103 They previously had a netgear orbi with 2 satellites but lots of bugs with losing internet... Three units replaced... They live quite large, thats what the satellites are fore. Now, what…
-
LTE2566 Firmware bugs
Hello everybody. My questions are 2, and connected. Why there is not an option to reset the data usage counters whenever you need, but only the option to set a reset date? Why when you try to set manually Date and Time (I tried to set 23:59 in order to reset the above counters, after setting tomorrow as reset date) you…
-
Problem with modem on zyxel nr7101
Welcome to
the forum, I have a problem with zyxel router nr7101 which is not under
warranty. Exactly the problem is the modem built into it. It's not working properly
for some reason - maybe it was because of the update but I don't know. As I
have already changed some routers, I would like to try to fix it.
Unfortunately,…
-
Problem with modem on zyxel nr7101
Welcome to the forum, I have a problem with zyxel router nr7101 which is not under warranty. Exactly the problem is the modem built into it. It's not working properly for some reason - maybe it was because of the update but I don't know. As I have already changed some routers, I would like to try to fix it. Unfortunately,…
-
Quality of Service port on NR7101
Does the 7101 have (QoS), Is it possible to set the (QoS) Quality of Service to port 6050 on the 7101? We are having issues with VoIP dropping calls.
-
LTE7490-M904 Manual APN
Hi, Whenever I go to set a manual APN settings on LTE7490-M904, its says "Setting not successful. Please try again." There is no way to move off auto APN mode. I am using correct APN settings from network provider. Any reason this is not working? thank you.
-
NR2101 SSH
My NR2101 exposes an ssh port but I am not able to login with the username and password I set up. Please advise on how to connect through SSH. Zyxel Firmware versionV1.00(ABUS.4)C0Software versionRXLG1.27.00.232_0R03MiFi Software versionAXDG1.27.00.194_0R03
-
Zyxel NR7101 - Static Gateway (APN setting)
Hello. :) Does anyone know what this setting does please as I can't see it in the documention? I currently use IP Passthrough to send the WAN IP from my ISP to my Asus XT12 Mesh Node. I use fixed mode and have assigned the MAC address direct (dynamic mode works just fine but I thought I'd hard code it). What I note is…
