-
<Article sharing> Digital integration: 2 rules to get it right for SBs
With the accelerated need for digital integration for all businesses, Social, e-commerce, and virtual presence continue to increase over traditional operations. Some sectors like restaurants and retail have already adapted much faster than others. But, for small businesses, guaranteeing connectivity requires overcoming…
-
Which LTE/5g modems/routers supports flawless bridge mode/passthrough
I live in a location with no decent cabled internet, so I am looking at a 4g/5g solution as this should give me a decent speed over my cabled alternatives But I need an unfiltered, 100% bridge/passthrough solution where this ISP public IP passes through un-NAT'ed to my internal firewall. I found the Zyxel LTE5388-M804 Will…
-
LTE7490-M904
Still no new firmware ? No carrier aggregation with this modem ? Cant lock to a specific cell, my manual says it should work ? I need that firmware update now......
-
Zyxel LTE5388-M804
Recently deployed one of these for a client pending installation of a leased line, following install this will become a failover option.We saw >100Mbps download and 32Mbps upload.Impressed.
-
External antenna on a NR5101 router
We just bought a NR5101 to have a better bandwidth than our poor ADSL line, being at 2.5 km from of a mast of our 4G/5G mobile provider with better speed already than the ADSL line with a simple mobile phone. First trials with the integrated antenna resulted in pretty good results in 4G modes at 30 to 110 Mbit/s…
-
5G/LTE Router Issues - Zyxel vs. Provider Issues
This guide will help you to distinguish whether any of the following symptoms of 5G/LTE connectivity might be a provider or device issue. Possible symptoms, but not limited to: 1. No internet access 2. Slow connection 3. Device losing connection 4. No access to device 5. Unusual behavior of device…
-
IP passthrough and public IP on LTE3301-PLUS
Hello, what the settings for getting IP passthrough and public IP on LTE3301-plus (firmware version: V1.00(ABQU.4)C0)? I have to buy a public IP from my internet provider (that is DNA from Finland). How exactly do I configure LTE3301-plus for that? What info do I need from my internet provider for this? Cheers, Pacala
-
LTE5366-M608 Internet disappears when downloading at high speed
Internet disappears when downloading at high speed. what could be the matter ? Thus loading increases to 23-27% and does not disappear. Also in logs there are error messages httpd: process_method_get:1883: Written error. Are there any updates for this device ? Was the LTE5366 tested at a speed greater than 100 mbps. at…
-
LTE3301-M209 Dropping Internet
Every day my internet (LTE) connection will drop until I restart my LTE3301. I'm in the UK using Vodafone 4G, with an external antenna on the LTE3301. I have the modem in bridge mode and using Eero Pro's as the routers. I've tested it without the eero's connected and it did the same thing. I'm using the latest firmware.…
-
LTE3301-Plus Can it be used as just a wireless access point / ethernet bridge?
I just need to use it as a wireless access point, no mobile sim. Anyone know what settings to use? Modem> Firewall> Switch> LTE3301-Plus Hope that makes sense. Thank you.
-
Can I automatically restart my LTE3202 Router?
I want to be able to restart my router daily at 00:05 so that my carrier will switch me over to the cheaper data plan. #SP_Nov_2019
-
Is LTE4506 (4G LTE-A HomeSpot) device affected by CVE-2021-35395 vulnerability?
Hi all, does anyone knows if LTE4506 (4G LTE-A HomeSpot) is affected by CVE-2021-35395 vulnerability? in positive case, how to fix it? Thanks in advance for support.
-
LTE3316 How to disable AP isolation
Hi I can't access Chromecast or wifi printers. It seems that in LTE3316 is AP isolation enabled by default but there is no option to disable it. Is there any way to fix this? #SP_Jan_2020
-
LTE7490 and NR5101 very bad experience!
I triedLTE7490-M904 and still trying NR5101. Disappointed in many ways. I have a BTS with B1B3B7B20 N3 DSS at 1,2Km free air line, -60db external -82db internal. LTE7490 does not aggregate more than one band. I tried to fix 4G with the B1B3B7 bands but nothing aggregates only one band, I only saw once for a few seconds…
-
LTE7490 M904
Hi my LTE 4790 Outdoor Modem fails frequently after about 2 Days, it seems like it goes offline. routing goes offline.In Monitor view it still shows "up" with ip adress, but when i do a ping test on the modem directly, it shows error. Any ideas? thank you Stefan
-
LTE3316-604-EU01V2F
Hello my modem: LTE3316-604-EU01V2F, I tried to install firmware V2.00 (ABMP.4) C0, my modem updated for 20 minutes, but after the update it did not boot, only the power indicator is blinking. connection to modem no. reset didn't help, reset + power didn't help. can i fill the firmware with other methods. no network access…
-
LTE5366-M608 unstable GSM/LTE connection + SSH login trouble
Hello, I recently got an LTE5366-M608 router and use the LTE only, with 2nd WAN disconnected. It mostly works fine, but at times the internet connection fails, with ping (8.8.8.8) showing either "Reply from 192.168.1.34: Destination host unreachable." or "Request timed out." This issue resolves sometimes spontaneously in…
-
LTE7480-M804 with Vodafone sim will not connect
Unit (LTE7480-M804) does not recognise the sim card. States no sim recognised. I can put my phones EE in, but the Vodafone will not recognise. Vodafone sim works fine in my phone. I have set the APN settings manually, nothing, same result. I have tried to update the firmware from current 1.00(ABRA.0)CO to (ABRA.3) or even…
-
Turned off remote management to LTE7480-M804 and cannot access it via my local network
Is there and way to connect to management console now? I turned off remote management, because I thought it will only turn off management via Public IP, not via my local network. It is difficult to reset it, because it is mounted on the outdoor wall.
-
LTE2566-M634 Port Forwarding
Hi! I have a LTE2566-M634 and I would really want to port forward the ports shown in the image, however I can't get them to be open. What am I doing wrong? Thanks in advance.
