-
IES-1248-51v Default Configuration File
Hello, I have acquired an IES-1248-51v second hand, and of course the username and password are unknown. Like a few others in the forum have discovered, in order to reset them it to factory defaults I need the default configuration file. I have searched high and low for this, however I do not see it available anywhere any…
-
install custom local certifikat fails (nr7101 & nr7302)
did anyone manage to install a custom local certifikat ?
-
NR7101 module upgrade
Hi I would like to upgrade the module on my NR7101, but the the current module software (RG502QEAAAR11A03M4G) seems to be for a NR5101, which makes me doubt how to proceed. Do I just pick the RG502QEAAAR11A03-R11A06 modem code file ?…
-
FWA510 Speed change low download but higher upload
So I'm on V1.20(ACGD.1)C0 Which is newer and when I was on 1.18(ACGD.5)C0 did not have any speed problems. I'm with EE on 100Mb rate limit and on 1.18(ACGD.5)C0 I was getting 100Mb down and sometimes 50Mb up went to V1.20(ACGD.1)C0 and got the same all good then about 3 days uptime something odd happened I was only getting…
-
Help setup network correctly.
Hi All, I recently got the Zyxel FWA710 for my farm network. This router serves as my 5G internet gateway for the farm. While setting it up, I realized that the built-in WiFi is only for management purposes — something I wasn’t aware of at the time of purchase. While I’m happy with the 5G reception, I want to explore the…
-
How to configure NR7103
I got a new Nr7103 but ate not able to reach it. For wireless I do not have the code Zyxel air is not able to read the qr codes It does not respond to ip adress 192.168.1.1 with cable connection. I also dont have any login password Anyone who can help?
-
FWA710 - Connection drop out / Power cycle
I've raised a support ticket but thought i'd ask here too. When the product is connected, it performs perfectly. Signal is constantly above -66 / -67db. However, it randomly looses connection and the only way to seem to be able to restore connection is to power cycle the unit. Once a reboot is performed connection is…
-
problema di disconnessione del router fwa 710
Buongiorno, ho un problema di disconnessione con il router 710. Il router in questione si disconnette da solo dalla rete e rimane senza internet per vario tempo, l'unico modo è quello di spegnerlo e poi riaccenderlo. Non parlo delle 4 ore che il mio operatore WINTRE italia cambia l'indirizzo IP, li procede tutto tranquillo…
-
FWA710 V2
Hi all, in the linked discussion below (in Nebula forum) it talks about the FWA710 not working with UK's EE 5g. I'm trying to determine if the V2 is a newer model with different firmware which fixes this issue, or does the issue remain with Zyxel 5g outdoor hubs not doing aggregation with EE 5g? First time getting into all…
-
NR7302-V1.00(ACHA.3)C0
How to get NR7302-V1.00(ACHA.3)C0 firmware for roll back?
-
FWA710 and third-party POE+ switch
I have a FWA710 (modem in PIC) and two NWA55AXE (Gjestehus and Persbugang in PIC). I recently added a POE+ switch after the FWA710 and it shows up with MAC adsress in topology. My problem is that the Cerbo GX does not receive an IP address when connected to the Switch via Ethernet cable. It connects only via Wireless. I…
-
Wifi not dicoveralble !- ZYXEL NR5103EV2
Hi, I have NR5103EV2, after RESET Wifi not dicoveralble by Many devises!! All setings are enabled.. Only connected with PC through LAN and connected to the Internet. What you think about the Wifi?
-
Port Fowarding FWA710 Query
Device: Zyxel FWA710 Web Server Device: 192.168.2.10 ISP Supplied Address: 10.xxx.xxx.xxx I have a device running a web server that can be accessed if my computer is connected locally but not remotely. The device is able to still send data out (email and mqtt). I've added port forwarding on 8080 (translated to 80) to…
-
supervisor/root and admin password of my NR7303
Hello, I'm need the supervisor/root and admin password of my NR7303. S/N is S240Z29003300 Can someone help me please? Many thanks.
-
NR7102 : SMS ?
I just got a NR7102 for 5G failover with my Ubiquiti Dream Machine SE, I had a quick look to the NR7102 webinterface, I don't see anywhere to acces the SIM card's SMS, is that an expected beheivour?
-
Zyxel LTE7490-M904 doesn't recognise SIM cards
Hi, I've just bought Zyxel LTE7490-M904 device, but it doesn't recognise any SIM card I tried placing in - two different operators from Bosnia, UK EE, Telekom from Serbia. I saw some other posts on "special" firmware that makes various SIM cards detectible. Anyone knows anything about this issue? Kind regards!
-
NR5101, not able to enable ip passthrough on the device
not able to enable ip passthrough on the device, and in addition it does not come up an option in the broadband menu to choose IP Passthrough. Upgraded to latest firmwares. on the info meny regarding it says: IP Passthrough Status IP Passthrough Enable showing Disable Any ideas?
-
Very bad connection on NR5103E
Hello, i live in Sweden and moved to a new place like 5km from my old house where my NR5103E worked very well i had low ping while gaming around 30 and ok internet speeds like 100mpbs+ but now the internet speed is very slow like 10-20mbps but sometimes it just randomly goes up to 100mbps+ and falls again i tried playing…
-
Admin Password reset
How can I reset the admin password?
-
NR5103EV3
I have reset NR5103EV3 several times with no result
